ASUS Maximus II Formula - new P45 king?

[Simps]

andressergio,

Nice! If going from PL8 to PL10 made it pass the test, then the problem is probably your ram needing more volts. Your NB is already at 1.45v, so that is not the problem for sure. This NB at 1.45v can handle PL8 - STRONGER at DDR2-1250+ easily.

Anyway, give it a try at vFSB: 1.37825 on your bios. See if it will make things better for you. From my experience, that vFSB is the best to go with +10 -35 +10 -35 CPU GTL's.
If vFSB alone don't help, try a 1.57vPLL with it.
If still no go, then try all this at once:

vFSB: 1.37825v
vPLL: arround 1.57v
vDIMM: arround 2.15v

I can almost bet that with this 3 settings going at once, you will go stable. I would only run your g.skill ram at 2.1v for 24/7, but for a short test like this, it is fine, you are not going to damage it at 2.15v.
I hope it helps.

[]'s
Simps