** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[MaXThReAT]

The max safe vcore is 1.55v.

Also I got my PL to 7

Thanks for the help guys

Nice PL. 1.55v... is that in the Bios or as seen in CPU-Z or similar?
I'm about to start tightening things up here. Can anyone assist with some recommended settings?-4GB Dominator DDR2-8500 I'm pretty much on auto.
BTW. I'm using the red slots.

******DRAM Performance Control****** 
Performance Enhance..............................[ Standard ]  
Extreme Memory Profile (XMP)...................[ Disabled ]  
MCH Frequency Latch..............................[ 400MHz ]  
System Memory Multipler..........................[ 2.66 ]  
Memory Frequency 1066...........................[ 1066 ]  
DRAM Timing Selectable...........................[ Manual ]  

CAS Latency Time................................[ 5 ]  
tRCD............................................[ 5 ]  
tRP.............................................[ 5 ]  
tRAS............................................[ 15 ]  

******Advanced Timing Control****** 

tRRD [ 4 ]............................................[ Auto ] 
tWTR [ 4 ]............................................[ Auto ] 
tWR [ 8 ].............................................[ Auto ]  
tRFC [ 68 ]............................................[ Auto ]  
tRTP [ 4 ]............................................[ Auto ]  
Command Rate [ 0 ]..............................[ Auto ]  

******Channel A Timing Settings******  

Static tRead Value    [ 10 ] ...............[ 10 ]  
tRD Phase0 Adjustment [ 1 ] ................[ Auto ] 
tRD Phase1 Adjustment [ 0 ] ................[ Auto ] 
tRD Phase2 Adjustment [ 0 ] ................[ Auto ] 
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]  

tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ] 
tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ]  
tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ]  
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto ]  

Dimm 1 Clock Skew Control.......................[ Auto ]  
Dimm 2 Clock Skew Control.......................[ Auto ]  
DDR Write Training..............................[ Auto ]  

******Channel A Driving Settings******  

Drive Strength Profile..........................[ Auto ]  
Data Driving Pull Up Level......................[ Auto ]  
cmd Driving Pull Up Level.......................[ Auto ]  
ctrl Driving Pull Up Level......................[ Auto ] 
clk Driving Pull Up Level.......................[ Auto ] 

Data Driving Pull Down Level....................[ Auto ]  
cmd Driving Pull Down Level.....................[ Auto ]  
ctrl Driving Pull Down Level....................[ Auto ]  
clk Driving Pull Down Level.....................[ Auto ]