Quote Originally Posted by dengyong View Post
Could you list your actual bios settings.

Is your vcore 1.3v under load ?
Turbo on ?
Ht on ?
I had the issue with the stock cooler. At load it would reach 100c load. I took it off and put the Cooler master V8 on it. Stock would net me 55-60c load and at 3.8 It was 100c load again.

I took it off and reset it. (Both stock and V8 using Arctic Silver 5)
Now I get 95c load at 3.8 and, 55c stock.

I've installed plenty of heat sinks so I'm pretty sure it's not a mounting issue.
I was thinking maybe CPU is uneven and needs lapping but I don't want to void warranty the same week I just got it.



This is my bios:

Quantum Bios:

Turbo Mode Function: Enabled

CPU clock ratio = 20x
Target core speed: 3.806mhz
CPU Clock: 190mhz
CPU Clock vs Uncore speed: auto
Target Uncore speed: 3048
CPU Clock vs Memory speed: auto
Target Memory speed: 1524
CPU clock skew: 0ps
IOH Clock skew: 0ps
CPU clock Amplitude ctrl : 800mv
Over clock recovery Enabled.
________________________________

CPU Feature:
PPM: Enabled
EIST: Disabled
CxE: Auto
Disable Bit: Disabled
Virtualization Tech: Disabled

Intel HT Tec: Enabled
QPI Control settings:Enabled
QPI Link Fast mode: Enabled
QPI Frequency selection: Auto
_________________________________

Memory timing config:

Mem parameter setting: Enabled
Mem Control Setting: Channel for Original
Channel interleave: 6 way
Rank interleave: 4 way

Dram timing selectable: By SPD
_________________________________


All Voltage Control:
CPU Voltage setting: +140mV
CPU Target voltage: 1.30875
Current: 1.39200
Default: 1.16875
CPU VTT: +100mV
CPU Vdroop compensation: Disabled
QPI PLL Voltage setting: 1.800v

IOH Core Voltage Setting: 1.10v
IOH VCCA 1.1v setting: 1.108v
IOH VCCA 1.5v setting: 1.506v
SB Voltage setting: 1.506v

DRAM Voltage setting: 1.65v
All Dimm ref voltage : x 0.500








As for load: http://i39.tinypic.com/5oftyc.jpg (SS)