Quote Originally Posted by The-Fox View Post
I know it won't be noticeable, its just for Benchmarks, not 24/7 work.

OK, I went to try what you said above and now I am having a very weird issue.
I am trying to work with DRAM multipliers higher than 8 but I fail to post

For instance, I set bclk to 180, DRAM to 1800Mhz, and Uclk to 3600 (twice as dram).
I can't post, no matter what DRAM voltage I use, I climbed from 1.8v all the way up to 2.1v and I couldnt post.
It seems that either using uclk multi higher than 16 or DRAM multi higher than 8 is impossible for unknown reason.
I actually tried that on the newest BIOS came out about a week ago, 1102 But I don't know if its due to that.

Am I missing something here or is that a known issue/limitation ?

I tried to raise the QPI link to 22/24X, it seemed like it was really doing it but when I opened CPU-Z i found it was actually still 18x, is that normal ?

Help/ideas will be much appreciated.
I have the R2E and I found running Uncore below QPI does not work too well on my board. Try running QPI with 22x multiplier when using 180MHz BCLK. 24x multiplier will not work as it is too high (24x180MHz > 4GHz which is max for QPI).