Quote Originally Posted by seban View Post
Hi Kurtz,

With you vtt I would start with 10/-30/10/-30 which gives you almost perfect 0.8v on all GTLs and then you can go up.

From my experience this board (at least mine) really likes High GTLs from bracket 0.9v and up to 0.98v.

If you want to aim for GTL refs like this try 100/70/100/70 for 0.9 and work your way up - you might be surprised when you will find that you got best results with >0.95v ...

If you want to try 0.95v then settings are 150/110/150/110 or 150/120/150/120 (for me best results yield setting when 1/3 are a bit higher then 0/2 - I am talking about actual gtlrefs values not settings for them in bios)

Cheers - dont be affraid of high numbers they are all in spec of CPU and MB - the lower vtt the higher correction numbers and your vtt is vlow in compare to quads i. e.
thx mate, your post is really clear

however i've another question about the NB GTL:

the formula is the same than the other (vFSB x 0.64 = result - in that case 0.768) so i need to set the NB GTL like the GTL 0/2 or the GTL 1/3 correct? so if i follow your example and i want to put ALL my GTL to 0.8v i need to set +34mV onto the NB GTL correct?

TIA and merry xamas!