"ASUS P5Q Deluxe discussion".

[Barbarosso]

İntel e8500 and thermalright true black coller
bios 1702

AI Overclock tuner: Manual
CPU Ratio Setting: 8.5 and 9.0 500*8.5=4250Mhz stability -500*9.0=4500Mhz dont stability
FSB Strap to North Bridge: 400
FSB Frequency: 500 -533
PCI-E Frequency: 100
DRAM Frequency: DDR2-1000
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: Auto

1st Information : Auto

CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 15
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time: 55
Write Recovery Time: AUTO
Read to Precharge Time: AUTO

2nd Information : 7-3-5-4-5-4-7

READ to WRITE Delay (S/D): AUTO
Write to Read Delay (S): AUTO
WRITE to READ Delay (D): AUTO
READ to READ Delay (S): AUTO
READ to READ Delay (D): AUTO
WRITE to WRITE Delay (S): AUTO
WRITE to WRITE Delay (D): AUTO

3rd Information : 14-5-1-6-6

WRITE to PRE Delay: AUTO
READ to PRE Delay: AUTO
PRE to PRE Delay: AUTO
ALL PRE to ACT Delay: AUTO
ALL PRE to REF Delay: AUTO
DRAM Static Read Control: Disabled
DRAM Read Training: AUTO
MEM. OC Charger: AUTO
AI Clock Twister: AUTO
AI Transaction Booster: Auto

C/P: A1 A2 A3 A4 | B1 B2 B3 B4
LVL: 10 10 10 10 | 10 10 10 10


CPU Voltage: 1,40 -1.46
CPU GTL Voltage Reference (0/2): 0,370
CPU GTL Voltage Reference (1/3): 0,470
CPU PLL Voltage: 2,00 -2.20
FSB Termination Voltage: 1.40-1.55 500FSB-auto stability ,533FSB 1.42-.1.54 dont stability
DRAM Voltage: auto
NB Voltage: 1.40 - 1.50 500FSB- Auto stability ,533 FSB =1.42v-1.50v dont stability
NB GTL Reference: AUTO
SBridge Voltage: auto
PCIE SATA Voltage: auto

Load Line Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew : Auto
NB Clock Skew : Auto
CPU Margin Enhancement: PERFORMANCE

Advance CPU Settings
CPU Ratio Setting: 8.5
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Intel® Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: disabled

my chipset nice coller two 6 cm fan
my cpu coller thermalright true black 120 two 12cm fan cool
my case two right intake 12cm fan and there front 12cm fan

my cpu 1.41 4250Mhz Stability 65C
1.42 and 1.48 4500 Mhz dont stability what the problem bios settings.

what the 533FSB nb and FSB Termination Voltage ??
İntel E8500 Cpu 4500Mhz 1.40v-1.48v not stability my bios settings ,what bad ??
helping me please
soryy i speak english bad