Gigabyte EX58-UD5/Extreme Discussion Thread

[Hornet331]

i am on f4n now, and for the last 2 hours ive been trying to get stable @ 4ghz and 4.1ghz with turbo on HT on, but i cant , i think it wants more voltage than what i needed for f4k,

also another thing i noticed,

cpu clock drive 700mv default on f4n
pci e clock drive 700mv default on f4n

on f4k cpu clock drive 800mv default
pci e clock drive 900mv

is there a reason for this ?
ive tried to change it to like the f4k was but still no good think it just wants more vcore and qpi/vtt v

i'll try for a bit more then im going back to f4k

800/900 are the default values (read it in the manual). F3 had the same 800/900 but all F4x versions till now defaulted to 700/700.

[freshy]

800/900 are the default values (read it in the manual). F3 had the same 800/900 but all F4x versions till now defaulted to 700/700.

my f4k bios didnt , it was 800/900

and with f4n i need
1.39375v vcore
1.375v vtt/qpi
for 4ghz turbo on HT on

with f4k i needed 1.375v vcore and 1.315v qpi/vtt to be stable at 4ghz HT on , turbo on