How would you guys compair it to the Cosmos 1000?
How would you guys compair it to the Cosmos 1000?
Case: Cooler Master 1000
MB: Gigabytes GA-990FXA-UD3
CPU: AMD FX-6300 3.5Ghz Stock
RAM: Ocz 4GB(2x2GB) DDR3
GPU: Nvidia EVGA GeForce GTX 560 Ti FPB
PSU: Corsair RM1000
CPU: Stock for now
My Heat
Originally Posted by XRogerX
I say go for the Cololer Master ATCS 840. Don't get me wrong, I love this case.
The ATCS 840 is a little bigger inside and cleaner exterior look! Look Here!
My setup is on Post 230
ASUS Rampage II Extreme | i7 920 cpu | Corsair Tri Channel 6 GB | GTX 580 FTW Hydro | Corsair P256 SSD| 4 TB OF HDD | Corsair HX1000 PSU
Loop #1: TFC 480 | KOOLANCE 350 BLOCK | Loop #2: TFC 360 | FTW HYDRO | Swiftech NB Block | MM Pinnacle 24 Case
HEAT
Current on going build, Mountain Mods Pinnacle 24
I agree, though i only have used a 690, i've seen both these cases and would suggest ATCS 840 for its "quality" looks...
I say go for the Cololer Master ATCS 840. Don't get me wrong, I love this case.
The ATCS 840 is a little bigger inside and cleaner exterior look! Look Here!
My setup is on Post 230
Ryzen 5 7600-Deepcool GammaxxV2-Gigabyte B650M GAMING X AX-16 GB Corsair DDR5-Gigabyte Eagle 6700XT-Corsair RM650-5x Artic Silver 140mms-Carbide 400R-Acer B246WL-FiiO E10/M40x-Fiio K5 Pro/LP6-M5/BLON-3.
I'll be getting a HAF for Christmas and plan on painting the inside flat black, but was wondering if
a) drilling the rivets out was necessary to painting the interior and
b) if I could get away with a light scuffing of the surface and paint as opposed to priming, etc.
New System
Asus Maximus II Formula | E8400 | 4 Gb Corsair Dominator DDR2 1066 5-5-5-12 | Sapphire Radeon 4850 1 Gb
2 x 500 Gb Seagate 7200.12 Raid0| Supreme FX X-Fi| OCZ Gamextreme 700 watt
XP 32-bit/Win 7 beta 64-bit| Zallman 9900| HAF 932
Old System
GIGABYTE GA-EP45-UD3R | Pentium D 805 @ 3.7 Ghz | 3 Gb XMS DDR2 800 Mhz 5-5-5-12 | ATI AIW x1900
2 x 160 Gb Seagate 7200.9 |Audigy 2 ZS | Cooler Master eXtreme Power Plus 500 Watt |Zallman 9500 AT | Lian Li PC61
I didnt take the rivets out, just taped around with blue painters tape after scuffing with 200 grit sand paper. worked great.
Make sure you get spray paint for metal. I used a Matte finish but semi-gloss or even gloos will look pimp
Now powder coating will look great. Too bad nearest shop to me is 190 miles over a snow covered pass, other wise that would have been my route.
ASUS Rampage II Extreme | i7 920 cpu | Corsair Tri Channel 6 GB | GTX 580 FTW Hydro | Corsair P256 SSD| 4 TB OF HDD | Corsair HX1000 PSU
Loop #1: TFC 480 | KOOLANCE 350 BLOCK | Loop #2: TFC 360 | FTW HYDRO | Swiftech NB Block | MM Pinnacle 24 Case
HEAT
Current on going build, Mountain Mods Pinnacle 24
I have a crazy urge to paint the entire thing in a black or dark grey pearl and use a combo of blue and white lighting, but for now I have neither the time or cash. Thanks for the info!
New System
Asus Maximus II Formula | E8400 | 4 Gb Corsair Dominator DDR2 1066 5-5-5-12 | Sapphire Radeon 4850 1 Gb
2 x 500 Gb Seagate 7200.12 Raid0| Supreme FX X-Fi| OCZ Gamextreme 700 watt
XP 32-bit/Win 7 beta 64-bit| Zallman 9900| HAF 932
Old System
GIGABYTE GA-EP45-UD3R | Pentium D 805 @ 3.7 Ghz | 3 Gb XMS DDR2 800 Mhz 5-5-5-12 | ATI AIW x1900
2 x 160 Gb Seagate 7200.9 |Audigy 2 ZS | Cooler Master eXtreme Power Plus 500 Watt |Zallman 9500 AT | Lian Li PC61
You paint internal case without primer base?My setup is on Post 230
Posting Permissions
Reply With Quote
Bookmarks