Quote Originally Posted by mathewgx View Post
Can you help me to overclock my q6600 (G0) on a gigabyte ud3r ?

I used the settings bellow , i am blend prime stable for 5hours and then it errors.

I need your advices on how to finetune the settings e.g. adjusting voltages or gtl for getting stable without the need of increasing vcore.


Here are my current settings :

Code:
Q6600 450*8 3600Mhz  
  
Robust Graphics Booster [Auto]  
CPU Clock Ratio [8]  
  
**********Clock Chip Control***************  
CPU Host Clock Control [Enabled]  
CPU Host Frequency (Mhz) [450]  
PCI Express Frequency (Mhz) [101]  
C.I.A 2 [Disabled]  
*********Advanced Clock Control**********  
CPU Clock Drive [900mv]  
PCI Express Clock Drive [900mv]  
CPU Clock Skew [0ps]  
MCH Clock Skew [0ps]  
*******DRAM Performance Control********  
Performance Enhance [Standard]  
Extreme Memory Profile (XMP) [Auto]  
(G) MCH Frequency Latch [Auto]  
System Memory Multipler [2.40B]  
Memory Frequency [1080]  
DRAM Timing Selectable [Manual]  
CAS Latency Time [5]  
tRCD [5]  
tRP [5]  
tRAS [18]  
*******Advanced Timing Control***********  
tRRD [8]  
tWTR [8]  
tWR [8]  
tRFC [70]  
tRTP [8]  
Command Rate (cmd) [2]  
  
***********Motherboard Voltage Control*******  
Load-Line Calibration [Enabled]  
CPU Vcore [1.4] (1.376 Windows)  
CPU Termination [1.38]  
CPU PLL [1.59]  
CPU Reference [Auto]  
MCH Core [1.3]   
MCH Reference [Auto]  
MCH/DRAM Refernce [Auto]  
ICH I/O [1.50]  
ICH Core [1.2]  
DRAM Voltage [2.1]  
DRAM Termination [0.90]  
Channel A Ref [0.90]  
Channel B Ref [0.90]  
Channel Timing Settings      
Static tRead Value [10]  
tRD Phase0 Adjustment [0]  
tRD Phase1 Adjustment [0]  
tRD Phase2 Adjustment [0]  
tRD Phase3 Adjustment [0]  
tRD 2rd (Differnt Rank) [8]  
tWR 2wr (Differnt Rank) [8]  
tWR 2rd (Differnt Rank) [7]  
tRD 2wr (Same/Difft Rank) [9]  
Dimm 1 Clock Skew Control [AUTO]  
Dimm 2 Clock Skew Control [AUTO]  
DDR Write Training [AUTO]  
Channel Driving Settings  
Drive Strength Profile [Auto]  
Data Driving Pull Up Level [Auto]  
cmd Driving Pull Up Level [Auto]  
ctrl Driving Pull Up Level [Auto]  
clk Driving Pull Up Level [Auto]  
Data Driving Pull Down Level [Auto]  
cmd Driving Pull Down Level [Auto]  
ctrl Driving Pull Down Level [Auto]  
clk Driving Pull Down Level [Auto]  
*****************Advanced BIOS Features*********  
CPU Multithreading [Disabled]  
Limit CPUID Max to 3 [Disabled]  
No-Execute memory Protect [Disabled]  
CPU Enhance Halt (CIE) [Disabled]  
C2/C2E State Support [Disabled]  
C4/C4E State Support [Disabled]  
CPU Thermal Monitor [Disabled]  
CPU EIST Function [Disabled]  
Virtualization Technology [Disabled]
Thanks.

edit : I use 2x2gb corsair dominator 1066.

Any help ?