Feser Monsta Pics

[DarthBeavis]

It's ridiculously huge.

I won't be singing it's merits as it's just plain too big for my tastes.

I have no issue with the design. I think the 4 port design is a good innovation.

But it's still ridiculous

I wish that is what she said, except the part about the ports.

[2low4u]

This thing Is a monster for sure! But hey if it's less than to Feser's or TC's & you have the room for it why not? lol Make for an interestingly Xtreme build don't you think?

Hmmm... as a figure of speech I suppose

There were some flames over this subject before... hopefully the story won't repeat itself and we'll all be civilized

However, I do agree that ingenuity (and of course the competition that comes with it) is welcome. Not my cup of tea, but I'd also like to see some numbers... and what may come next

Why do you bring up old crap already talked about? Twice You did it in this thread when it wasn't needed in the least nor was it justified. Let the old discussions die in the flames of the old threads & leave it at that!

Thank you come again! /Apoo

[aspire.comptech]

I for one like the 4 port design. It allows for more customization of rad locations.

Explain to me one practical situation where having ports on both sides allows for additional rad locations.

No matter what You going to be mounting it to something, and doing so will block the opposite sides ports...


I know someone mentioned using the others as fillports, but just trying to come up with a practical way of implementing that makes my brain hurt...

[DarthBeavis]

Explain to me one practical situation where having ports on both sides allows for additional rad locations.

No matter what You going to be mounting it to something, and doing so will block the opposite sides ports...


I know someone mentioned using the others as fillports, but just trying to come up with a practical way of implementing that makes my brain hurt...

Custom cases I could use that rad in a custom build rather easily using ports on both sides . . .think outside the box

[T_Flight]

I could see somebody putting 4 or 5 of these in a Ascension with a pedestool. 2 on the CPU, 2 loops for dual GFX Cards, and one for the motherboard. Add another for Tri-SLI setups. You'd need dual fans and shrouds on each side of the radiator and shrouds. 2 PSU's to power it all, 4 or 5 RD 30's....ummmm....aw, and a Nuclear Reactor outside your house to power the complete system once it's built.

Total Cost? 25,000 dollars. That's just for the cooling system. hahaha Now THAT is Xtreme.

I'm having a blast right now.

[HESmelaugh]

T_Flight, I have a suggestion that fits with the level of extreme you proposed:
A separate loop cooling all the pumps in the other loops.

With another Monsta, why not?

[mstrmold]

Explain to me one practical situation where having ports on both sides allows for additional rad locations.

No matter what You going to be mounting it to something, and doing so will block the opposite sides ports...


I know someone mentioned using the others as fillports, but just trying to come up with a practical way of implementing that makes my brain hurt...

See, your imagination is limited by the fact that all rads to date only have two ports. You must expand your horizons. Nothing says you have to mount it against a wall of a case, correct? You could also shroud one side and then use 90's to help with inlet routing. Much more possibilities...

[T_Flight]

T_Flight, I have a suggestion that fits with the level of extreme you proposed:
A separate loop cooling all the pumps in the other loops.

With another Monsta, why not?

Cool.

BTW, if Feser comes out with a Nuclear Reactor I want credit.

[fusionmkx]

It will be interesting to see how this will do against the 9x120mm radiators like the BlastFlow Extreme or the MagiCool XTREME NOVA 1080. Surface area exposed over density...

[ProtoTyper]

wow. what a big thing. i think this 2 in/out G1/4 feature is the best ive ever seen long time. you can use thermo probes in the threads or even refill the rad, when it is mounted outside. you can check in and out temperature of the water when you have 2 probes installed. you can combine 2 monstas with a sli fitting or can make a big mega sandwich. wow. or two loops parallel. no limits. ups, limited to cases for sure. i doubt it will fit in lots of cases. but i guess it wasnt seem to be for use with standard cases.

[WaterFlex]

FESER MONSTA IS IN STOCK !!! 200 EUROS!

[Polizei]

FESER MONSTA IS IN STOCK !!! 200 EUROS!

I see no price or availability date.

[Waterlogged]

FESER MONSTA IS IN STOCK !!! 200 EUROS!

Wonder if they got permission from Michael Buffer or if they stole it like everything else?


I also find it quite amusing that they include 3/8" x 1/2" compression fittings with such a "huge" rad.

[zlojack]

Honestly...someone needs to explain to them that they have the dumbest website ever.

I'm waiting to see tests on this rad, but I still think it's ridiculous.

[WaterFlex]

I see no price or availability date.

You should register on website to see prices.
I`m sure, this rad is the best of the best.

[DarthBeavis]

Wonder if they got permission from Michael Buffer or if they stole it like everything else?


I also find it quite amusing that they include 3/8" x 1/2" compression fittings with such a "huge" rad.

who is Michael Buffer? Also, accusing a vendor of stealing is really going too far . . .you do not have proof and you are not one of the parties involved so you should refrain from making accusations you cannot back up.

[D-Cyph3r]

FESER MONSTA IS IN STOCK !!! 200 EUROS!

Thanks for linking to the most ridiculously overly loud web page in history.

[zlojack]

who is Michael Buffer? Also, accusing a vendor of stealing is really going too far . . .you do not have proof and you are not one of the parties involved so you should refrain from making accusations you cannot back up.

"Let's get ready to rumble!"

Is Michael Buffer and that's a recording of him.

Using it without his permission on their website would be the "stealing" in question, I believe.

[Waterlogged]

who is Michael Buffer? Also, accusing a vendor of stealing is really going too far . . .you do not have proof and you are not one of the parties involved so you should refrain from making accusations you cannot back up.

Michael Buffer is a legend in the boxing and wrestling world and is very well known around the world.

As for proof, sadly it had to be cleansed from the site for legal reasons. On this topic, I will take Vincent at his word as well as my own eyes and personal knowledge on the subject. My "accusations" are my own personal opinion and do not reflect the opinion of anyone within management of, or XS itself.

[DarthBeavis]

Michael Buffer is a legend in the boxing and wrestling world and is very well known around the world.

As for proof, sadly it had to be cleansed from the site for legal reasons. On this topic, I will take Vincent at his word as well as my own eyes and personal knowledge on the subject. My "accusations" are my own personal opinion and do not reflect the opinion of anyone within management of, or XS itself.

I like Vincent and Mario . . .and I have probably more inside information from sources that deal with both of them but even that does not matter as I was not DIRECTLY involved so it would be really reaching to make a judgment . . .I am NOT saying you do not have a right to an opinion . . .but you are a RESPECTED person here (I respect you greatly) . . .it is below you to make such a comment. Can we please not lower the level of discourse here by making statements that drive off vendors? Look how far XS has some in the last two years . . . heck KOOLANCE has reps posting here . . . .be critical of products . . .that is useful.

As far as Buffer . . .you mean the announcer? Now I get it . . .Is Bruce Buffer his little brother or something (UFC accouncer)?
http://www.bufferzone.net/main.html

BTW: MMA > boxing and professional wrestling = ghey

[axis]

who is Michael Buffer? Also, accusing a vendor of stealing is really going too far . . .you do not have proof and you are not one of the parties involved so you should refrain from making accusations you cannot back up.

In addition to who he is, he's also trademarked the "lets get ready to rumble" phrase. No one can even say it at a event without his express permission. He's flown in and paid VERY well to just say those 5 words.

Axis

[Waterlogged]

I like Vincent and Mario . . .and I have probably more inside information from sources that deal with both of them but even that does not matter as I was not DIRECTLY involved so it would be really reaching to make a judgment . . .I am NOT saying you do not have a right to an opinion . . .but you are a RESPECTED person here (I respect you greatly) . . .it is below you to make such a comment. Can we please not lower the level of discourse here by making statements that drive off vendors? Look how far XS has some in the last two years . . . heck KOOLANCE has reps posting here . . . .be critical of products . . .that is useful.

As far as Buffer . . .you mean the announcer? Now I get it . . .Is Bruce Buffer his little brother or something (UFC accouncer)?
http://www.bufferzone.net/main.html

BTW: MMA > boxing and professional wrestling = ghey

I'm sorry you respect me DB, I truly am.

What I see on the web from Fester, is a company that stoops to some really low tactics such as multiple shrills on just about every forum touting how awful other products are and how great Fester products are. Sorry if I call a dog turd what it is.


As for Bruce, he's Michael's half brother.

[DarthBeavis]

In addition to who he is, he's also trademarked the "lets get ready to rumble" phrase. No one can even say it at a event without his express permission. He's flown in and paid VERY well to just say those 5 words.

Axis

I am in the wrong business . . .

[DarthBeavis]

I'm sorry you respect me DB, I truly am.

I am sure we can modify my view of you to make you change your to a

[Waterlogged]

I am sure we can modify my view of you to make you change your to a

Honestly, I don't expect/ask for anyone to respect me (personally, I wish they wouldn't) and I don't respect anyone myself, that is until I've met them in person and get to see if they are the persona they present to the world. If they are, and I get along with that person, they will undoubtedly get my respect. Anyone can behave however they want on the web and they usually do. How they act/behave in person is something completely different and very hard to disguise and I'm pretty good at reading that.

I do however respect what ppl accomplish (Martin's testing for example) and I will give props for that, just don't take it as respect.