ASUS Maximus II Formula - new P45 king?

[GeorgeVasil]

lol, I was going to ad that it wont boot below pl10. so your correct sir... thx

Ai Overclock Tuner : Manual
CPU Ratio Control : 8
FSB Frequency : 500
CPU Clock Skew : Auto
North Bridge Clock Skew : Auto
FSB Strap to North Bridge : 333mhz
DRAM Frequency: DDR2-1002MHz
Dram Clock Skew CH1 A1 : Auto
DRAM Clock Skew CH1 A2 : Auto
Dram Clock Skew CH1 B1 : Auto
Dram Clock Skew CH1 B2 : Auto

DRAM Timing Control: Auto

DRAM Static Read Control: Disabled
Dram Read Training : Disabled
MEM OC Charger : Auto
Ai Clock Twister : Auto
Transaction Booster : Manual

Common Performance Level [10]

PCIE Frequency : 100

CPU Voltage : Auto
CPU PLL Voltage : 1.53975
FSB Term : 1.209
DRAM Voltage : 1.8
North Bridge Voltage : 1.35175
South Bridge Voltage 1.5 : 1.5
South Bridge Voltage 1.1 : 1.10

Load Line Calibration : Disabled
CPU Spread Spectrum : Disabled
PCIE Spread Spectrum : Disabled

Everything else unchanged from defaults.

Fails to load bios and fails to boot. What am I doing wrong here?

Try to change your Ram voltage to 1.9..

Also set a value for your cpu voltage.

--------------------

You have 2 more options

Try for 7.5*533 Rams 1066 1:1 PL10 ..you wil get ~9600K Read

Or 9*455 Rams 1140 (mine 1100 PI have done 11h dual prime at 570 with 2-2.05V)