Nop , the only jumpers are for some kind of bus overclocking that is no good. I mean it does work but only over clocks cpu from 2.6G to 3.1G without ACC on and no extra volatage , but thats it.

Titan7171 has the same mobo and I read his posts in this thread and found out if cpu vid is set to 1.45 along with cpu vddc to 1.45 in AOD , cpu-z shows cpu core volatge @1.496v as u can see in the pic above,that helped a lot in getting things stable above 3.4ghz.Thx to Titan7171 for this use full post.