Quote Originally Posted by xaris106 View Post
Yeah I have it stable at 3GHz from bios (8h prime) and I use AOD with these settings as base to try for more, as you suggest.
Hey, if you wouldn't mind, would you edit your sig so we can see what parts you are using? If your using anything less than a 9950BE, 3.0Ghz may be the best you can get with your particular chip.. My 9850BE is pretty weak and takes way more V's than I'm comfortable with to go much over that.

Here's a SS of my settings in AOD (w/9950). Bumping up the NB(chip) voltage and the HT voltage helped stability quite a bit. I also raised the SB v's, but to be honest I'm not sure if that was really necessary, it's only one bump and things were running good so I left it alone for now..

CLICKABLE:


I'm pretty sure this chip would do a little better than this with more V's, but I'm on air and my load temps hit 60c while running Linpack...

Speaking of Linpack, you might want to use that to test your OC's rather than long Prime runs... It stress's the system much harder, but doesn't require hours of stress to your Mobo's Power section (which tends to kill boards!)...

Here's a link for the IntelBurnTest (Linpack), Thanks again to AgentGod

LINK: http://www.xtremesystems.org/forums/...d.php?t=203011