Thanks alot, i tried and it WORKED !=DDDOriginally Posted by Mahyar.FF
Ramerix,
I got this mobo working even with 500fsb (posted successfully, with increasing the NB voltage)
My opinion is that these mobos (DX38 and DX48) are sensitive to some frequencies!
Try to disable "Watch Dog" in BIOS, because it shows the unsuccessful messages and prevents you from gaining more FSB speeds.
At least doing this, worked for me, hope to work for you too
And if you don't know, first change the Mem/FSB ratio to 800/400 and decrease your CPU multiplier to lowest value, before trying to find the highest working FSB settings
Good Luck
I run the FSB at 423 and 9 multiplier = 3.8Ghz now.
But Windows could not boot when I have the Reference Frequency at Defualt, 1516Mhz at the memories. So I change the Reference Frequency to 400. And it worked!!
I hope I can rise my FSB to nearly 445 !
Do you think I need to change my Core VID at 9 x 445FSB = 4Ghz ?
I have 1.250 V and the lowest I can choose AFTER 1.250 is 1.28xx ??
And I drive my Mem in orginal FSB now, should I clock them later when I am satisfied with my clock ? :P It will rise the performence to clock the memory ? Aight?!
But I dont know how I clock them without the "automatic" clock when I rise the CPU FSB!
I`m really happy that you help me!!!!
Reply With Quote
Bookmarks