** OFFICIAL ** Intel DX38BT & DX48BT2 BoneTrail Thread

[tam]

Hey Tam,
I have also OCZ3P1600EB4GK memory, but I'm not able to put my system to 1600 FSB :-(
I would like to ask you if your memory worked for you on 1st time? Just inserted, switched settings and everything was OK?
And is your memory in blue or black sockets?
Also what is the result of Prime?

I used same settings as you, but I get ramdom reboots and with exactly same settings I'm not able to pass memtest. Right now I'm solving it with OCZ tech support and it seems that one module is faulty.

Hey bro,

afaik, you gotta change the processors FSB to be able to run the memories at 1600. If you only changed the settings of the memories I doubt they are gonna work. Not sure about this, somebody else correct me if I'm wrong. My memories, since they are DDR3-1600, they are on the black slots (if you read the yellow paper that comes with the motherboard it says DDR3-1600 memories are only supported on the black slots, channel A and B DIMM socket 1).

If you can provide more information on what you are trying to do it will be helpful. Post your bios settings too.

About the bios version 1893, I've been running it since I got the board and I haven't experienced any reboots or any malfunction on it, it's running pretty smooth. The only setting I saw that isn't working well is C1E, even when it's off it keeps modifying my multipliers value but since I only turn it off to run benchmarks and tests it doesn't bother me.

Manel, I only changed the video card's fan speed enough to be quiet and to decrease the temperature, it's at 35% fan speed (20% is the stock speed) and now the card it's at 40C @ idle, 50C @ full load. And yeah, Venezuela is pretty good, I just wish the political situation changes soon enough.