DDR2 : 700MHz Club

[fatguy1992]

Awesome only 2.6v

Keep pushing it

[M3kk]

Thats "only" 690.405 MHz .
Remember, the 3:5 is 2:3 reali.. so 1.5 x FSB is the real memory MHz..

[Highgertz]

M3kk

I want to look at the basis of this formula: 3:5 is 2:3 reali.. so 1.5 x FSB is the real memory MHz.., actually it can 1400 +

Here, too, is wrong?

[CryptiK]

M3kk
This is an open question.
G.SKILL F2-9600 plus GA-EP45-DS5, 80-mm fan - 1534Mhz 5-9-9-25 2х2gb 2.6v

This is really on 2:3 divider. Real speed is actually 690.4 MHz (DDR2-1380.8).

Still impressive for 2 x 2GB, however I have seen that kit do 678.5 MHz on 2.1v, so it doesn't look like they scale with voltage well at all.

[fatguy1992]

OMG 678MHz w/ only 2.1v for 2x2GB.

[M3kk]

M3kk

I want to look at the basis of this formula: 3:5 is 2:3 reali.. so 1.5 x FSB is the real memory MHz.., actually it can 1400 +

Here, too, is wrong?

That is 675.375 real .

[Highgertz]

M3kk
It is a pity that so

[ZoLKoRn]

Thats "only" 690.405 MHz .
Remember, the 3:5 is 2:3 reali.. so 1.5 x FSB is the real memory MHz..

Well 3:5 is 2:3 real so if 5:8 it really or not and what real clock for 5:8 it it not real ?

Thanks M3kk

[M3kk]

AFAIK just the 3:5 is bugged, the 5:8 is ok, isnt it?

[systemviper]

AFAIK just the 3:5 is bugged, the 5:8 is ok, isnt it?

Where can i find out more about this bug?

[M3kk]

Here: http://www.xtremesystems.org/forums/...d.php?t=208542 you can read about it too, but exactly dont know where .

[ZoLKoRn]

AFAIK just the 3:5 is bugged, the 5:8 is ok, isnt it?

i think 5:8 it bugged too maybe, look at my setup 700MHz and see that Vmem only 2.36V !!!

and i can boot at 650Mhz ram with all voltage Auto setting in bios and max @680MHz by auto voltage

[Monstru]

The only bugged divider I has seen untill now is 3:5.

[Ming@s]

gskill F2-8500 HK 2x1GB
@ 750MHz 2.56v BIOS



air cooling 2x80cm fans.

Hello that config, you use you for your GsKill making 750.


My only with the 2.7v give 660Mhz.

[westsider]

http://valid.x86-secret.com/show_oc.php?id=449103

Cellshock 8500 CL5 D9GMH

754MHz 2.74 Volts real

[WaterFlex]

http://valid.x86-secret.com/show_oc.php?id=449103

Cellshock 8500 CL5 D9GMH

754MHz 2.74 Volts real

Well done! Cellshock FtW

[fatguy1992]

http://valid.x86-secret.com/show_oc.php?id=449103

Cellshock 8500 CL5 D9GMH

754MHz 2.74 Volts real

Awesome work, I'm too scared atm to use 2.74v on my sticks, only just got them.

[westsider]

in the waterplate of my dog there was ICE in plastic package
air temp -5 and ice was cooled at about -8
it had no condensation and i could nearly achieve 800MHz

only so i could go above 760Mhz but with 3.05 volts

i will not validate some result
we had war in georgia for the first place of ddr2 clock and i am waiting for his answer

[pangingIII]

Hello that config, you use you for your GsKill making 750.


My only with the 2.7v give 660Mhz.

for the G.Skill 8500 HK's at 3:5 DDR2-1500 the voltage setting on EP45-UD3R (F3 BIOS) was same as this one below (see voltage setting in Easytune 6),
but was using different CPU multi and Vcore, also for the G.Skill kit I had to use more vdimm and the memory timing was using XMP profile 1 in BIOS (5-5-5-15 / 15(tRRD)-6-13-60-6).

[Highgertz]

G.SKILL F2-9600 CL5D-4GBPI does not cease to amaze
New WR for 2х2Gb
1545MHz 5-5-5-15 2.6v dryice


http://valid.canardpc.com/show_oc.php?id=468849

[WaterFlex]

Good job, Highgertz.

[systemviper]

Is there a list or is it just post by post....

thanks/steve

[Riska]

That is not the Wr there is a couple of people there have achived 1600+ mhz ddr2 speed look at the gigabyte competition

[Highgertz]

WaterFlex
You have too beautiful result
systemviper
The tests will, I hope this is not the last dispersal.
Riska
A careful here 2х2GB.

[FoX360]

I need a DDR2: 800Mhz Club



This result with air @ Delta.
Ouuu Yeahh, Merry christmas!