we've found THE GOLDEN ONEs : AMD Athlon64 World Record Thread!!

[[XC] Oj101]

I'm just a lucky man

Well this is XtremeSystems so the chip is going under phase again this afternoon

[knopflerbruce]

You have more luck than I have had in the past. My 3000+ winchester wr chip died in the same circumstances

How did you manage to run that CPU at sub-zero btw? My winchesters usually hate low temps, reboots/freezes etc...

[massman]

Magic stepping; there's only one for the Winchester and that's the CBBHD 0445 SPAW". My CPU was batch 0085, btw, and WR was obtained without any form of pushing. Didn't even put cooling paste between evap and chip

[knopflerbruce]

Magic stepping; there's only one for the Winchester and that's the CBBHD 0445 SPAW". My CPU was batch 0085, btw, and WR was obtained without any form of pushing. Didn't even put cooling paste between evap and chip

I turned one of those down a while ago, I always thought 0448SPAW were the best

Btw, I forgot to post this one:

http://valid.x86-secret.com/show_oc.php?id=446621

Not bad for an 11 multi chip, and +13c

[massman]

Both are good: CBBHD 044x SPAW

[Turrican]

w00t result bruce

[[XC] Oj101]

You have more luck than I have had in the past. My 3000+ winchester wr chip died in the same circumstances

Seems I'm not so lucky. I now have a semi dead memory controller. Below 7'c I lose dual channel

[Turrican]

Seems I'm not so lucky. I now have a semi dead memory controller. Below 7'c I lose dual channel

damn, bad to hear

[SAE]

Athlon XP had its limitations... I already got 30s in 2004/5 doing 12.5x265MHz on Lanparty nForce2 Ultra B with fully mods (vdroop, vcore, vdimm, ocp). See my sig. Will have to search for the original pics on my old hdd though, as the attachment does not exist anymore... XP-M 2600+ that was. Great times... *sigh*

[massman]

No need to, SAE, I still have them stored.

Maybe you need to look at this thread: http://www.xtremesystems.org/forums/...d.php?t=205865

[massman]

[stunned_guy]

I´m back from holidays
Nice results here in the past its time for me to do my piece of this thread

[knopflerbruce]

I´m back from holidays
Nice results here in the past its time for me to do my piece of this thread

We're waiting

Maybe I'll try my LE1620 this weekend, that one MAY be as good as the LE1600 (if what my friend told me is right..., apparently he suicided at 3820 on air and just above 1.5v). Too bad my LE1640 sucks

[stunned_guy]

I play with the guess to switch to socket am2 next time....but i dont know when i should start. waiting for deneb or earlier ?
but first i have to test my 200th. socket 939 processor...5 will be needed

[SAE]

@massman

Wow. Did not think anyone remembered me and these days. Makes me even happier to be back here. Thanks for those pics.

@all
Deneb is truely looking promising. I am eager to see them perform/oc. Waiting for it possibly pays out.

[massman]

Wow. Did not think anyone remembered me and these days. Makes me even happier to be back here. Thanks for those pics.

Well ... those three pictures have been standing on my desktop since days before 2nd AOCM.

[Turrican]

@massman

Wow. Did not think anyone remembered me and these days. Makes me even happier to be back here. Thanks for those pics.

@all
Deneb is truely looking promising. I am eager to see them perform/oc. Waiting for it possibly pays out.

i also have them in my archives

[[XC] Oj101]

Wish me luck, I'm trying 32m at 4GHz tomorrow

[SAE]

Luck!

@massman + Turrican

Hrhr. *proud is*

[stunned_guy]

@ Jonathan
Go go go...

[knopflerbruce]

Gl folks

I re-tried my 4600+ toledo on air...

http://valid.x86-secret.com/show_oc.php?id=449542

Had 3405, but the screen froze (after cpuz updated the frequency...). 1.6v, and 30 idle (ITE). Can't BELIEVE this thing didn't do more than 3433 on dryice and 1.77v back when I benched it. I need to retry this thing at like ~5c, maybe I can get close to Philip

Edit: 1.63v and an extra fan that gave me 1-2c lower temps: http://valid.x86-secret.com/show_oc.php?id=449554

[Turrican]

Luck!

@massman + Turrican

Hrhr. *proud is*

yeah, oustanding work you did back there

[knopflerbruce]

http://valid.x86-secret.com/show_oc.php?id=449871

closer, but still a bit far away...

Putting the pot in the fridge works in a way, but it gets hot too fast - can only get it to boot with low temps once or twice.

[Turrican]

nice bruce.

btw. i added your amd athlon 64 venice 4100+ request
http://www.hwbot.org/quickSearch.do?...Venice+%280%29

[[XC] Oj101]

Bummer, all weekend I just got random patterns on the diagnostic LEDs