Try E5200 Overclocking!

[Deluge]

This was on dice, but somehow we had horrendous contact with the pot. The pot barely touched the tim, let alone the cpu itself. I'll be trying again in a few weeks with more dice and some LN2.

VID 1.15 - batch 3827A396

[HDCHOPPER]

exellent clock serenity !

pot not touching deluge ? thats gotta get ya mad better luck next time bro !

[s e r e n i t y]

exellent clock serenity !

pot not touching deluge ? thats gotta get ya mad better luck next time bro !

Thanks man. There is so much more headroom left with this chip. I got it up to 3.6GHZ with about 1.2-1.3v on vCore so i'm looking forward to dicing with it

[RejZoR]

I'm at 3,9 GHz now. Not sure how stable it is but it passed 7-zip compression with Ultra preset (7GB of data) and Orthos Gromacs running together (and then just Gromacs for another hour) and later 32M HyperPi. No problems or errors. So i guess thats enough.

[kaptan54]

has it cold that cpu under ln2 ?

[TheGanG]

I don't advice that crap to anyone. I have it just for tests...

That chips have all FSB walls, but some of them are really good clockers...
I will try that chip under D-Ice Pot...

E5200 @ 4675MHz 1.75V
Noctua Cooler+FM123 Fan (Sub Ambient /10°C)
+ LG Airconditioner 11K BTU/Modded to sub 18°C
Load: 53°C / Idle: 30°C
4600MHz/3DMarks
Foxconn BlackOps
ATI Sapphire X1650Pro
Kingston Hyperx DDR3 1800
High Power 1000W


http://valid.x86-secret.com/show_oc.php?id=441123

[xbrian88]

I don't advice that crap to anyone. I have it just for tests...

That chips have all FSB walls, but some of them are really good clockers...
I will try that chip under D-Ice Pot...

E5200 @ 4675MHz 1.75V
Noctua Cooler+FM123 Fan (Sub Ambient /10°C)
+ LG Airconditioner 11K BTU/Modded to sub 18°C
Load: 53°C / Idle: 30°C
4600MHz/3DMarks
Foxconn BlackOps
ATI Sapphire X1650Pro
Kingston Hyperx DDR3 1800
High Power 1000W


http://valid.x86-secret.com/show_oc.php?id=441123

bios for blackops please?

[s e r e n i t y]

DICEing in 24hours. Looking forward to showing some good results

[madmax999]

"in 5min OC" under water cooling
no special tweaks and other stuff, i just wanted to see what this babby can do
i'm using E5200 until i find some good E8400



i'm sure that he can do much more

@ 3500MHz 1.275V for 24/7 work

[HDCHOPPER]

haveing a heck of a time getting past 4.1 wothout the .5 multi enguaged argggggg

[TheGanG]

bios for blackops please?

Latest Beta BIOS

SetFSB for BlackOps: ICS9LPRS919BKL (actually for Foxconn Mars, but works)

7-7-7-17-60-L6-16-17-6-5-2T> if it doesn't works, try simply 8-8-8-24/others auto

Ratio: 1:4 333

CPU: 1,6V/3875MHz (Boot) 1,66V/4254MHz (Boot) 1,69V/4441MHz (Boot) 1.71V/4628V 1.75V/4675MHz

Skew: 300 Amp: 800
V Drop: Enabled
PLL: 1,5V+
VTT: 1,5V
GTL-0: +2
NB: 1,5V
SB: 1,5V+
Dram: 1.9V

[TheGanG]

Under D-Ice, 5071 MHz

[s e r e n i t y]

what vCore did u use to get 5.07GHZ?

[TheGanG]

what vCore did u use to get 5.07GHZ?

1.74V-1.78V will be ok...

[s e r e n i t y]

nice.

I had a FSB wall at about 410. couldn't u quite get up to 5.1GHZ?

[TheGanG]

nice.

I had a FSB wall at about 410. couldn't u quite get up to 5.1GHZ?

I have seen your post today. May be i need some more juice

[George_o/c]

@TheGanG: Nice scores there Although, you should know, that in case you want to upload you scores in hwbot.org, wPrime v1.55 is the only version of wPrime allowed

[TheGanG]

@TheGanG: Nice scores there Although, you should know, that in case you want to upload you scores in hwbot.org, wPrime v1.55 is the only version of wPrime allowed

So? Older version is denied me to upload my scores
I used newer version to upload my W Prime scores... Ok, i will try v1.55 again...

[stangracin2]

i like how i'm the one that gets the ty E5200 lol

[eXa]

Just gotten myself one of theese, bought a (used) cheap ass msi p35 platinum too and 8gb of gskill F2-8800CL5Q-8GBPI.

Im currently at 3740 (340x11) and i think ill stop there for 24\7. Not much tweaking options on this board so dont know if i could have made it with lower volt. 1.4825 on cpu in bios but 1.454ish according to cpu-z.
fsb vtt is at 1.175, nb and other stuff is at stock.
4Ghz would be funny but im not comfortable with 1.55v+ for 24\7 setting.

SLAY7 3839A862, M0 and 1.15v VID.
Watercooled and coretemp says 44c ish under load.

Edit: Also using W7 64bit....

[Carlos0068]

Been trying to get some max fsb on my chip, So far 360 seems the highest stable clock, i can get it all the way up to 370 but freezes when stress testing.

Screenies of 24/7 Clocks

3.78Ghz @ 1.425V, Stable under Ibt/Prime/Orthos (O/P Being 6+ Hours Run time)

Cpuz






3.96Ghz @ 1.49V, At the said voltage, its stable under both Ibt/Prime95/Orthos

Cpuz



Temps:Max Recorded During Stress testing

3.78Ghz: IBT=63C , Orthos Blend= 62C.
3.96Ghz: IBT=72C , Orthos Blend= 65C

Voltages Info

Cpu Vcore: 1.425V (3.78Ghz) & 1.49V (3.96Ghz)
Cpu Term: 1.280V
Cpu PLL: 1.50V
Cpu Ref:0.81V

MCH Core: 1.28V
MCH Ref:0.890V
MCH/DRAM Ref: Auto

Those are my 2 Overclocks i use, So far all i need is 3.78Ghz, I Keep my chip at its max fsb, So im sure if i lower the fsb a bit and use a different multiplier, it can do 4.0ghz under 1.49V

If anyone sees any problems, let me know, my dream would be getting this chip to do 400fsb

I love this chip to death, I do have some tempations to get a E8400 Though

[Marciano]

nice overclock

[Carlos0068]

Updated my post, Check it out

[Snowman89]

I got one myself but it cant handle any fsb over 340 stable But max printscreen is 4400mhz at 1.65v and ive run Sp1 at 4200mhz and 1.625V . Although i bet i can get to 4.3ghz with a better air cooler since mine sucks. This cpu did 5ghz on DI and about 4.8-4.9 benchable on DI.

Edit: On DI i could run it on 400fsb but not stable. Think all fsb was unstable so it couldnt complete anything above superpi 1mb

[5ILVgearX]

Very impressive Overclocks here look forward to getting myself one soon