** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[babalouj]

I bought the UD3R a few days ago and stuck the F4 bios on there. I have been experiencing weird bluescreens and restarts while stress testing with prime 95 and intelburntest. These programs dont stop and tell me they are unstable, they are just bluescreening my computer. I cant stop the restarts but I can make them take longer to occur. I can prime for around 2 hours on blend before it restarts and intelburntest, when it finishes, comes back stable but most of the time it restarts my comp. Vcore definitely isnt the issue because I get the same restarts from 1.25V to 1.5V. Here are my current settings, maybe you guys can point me in the right direction.

470x9
Performace: Turbo
MCH latch: 333
Memory Multi: 2.00B
Memory 5-5-5-18 @ 1.92V (These settings were stable on my IP35Pro up to 505)
LLC: Enabled
Vcore: 1.3375V
Cpu Termination 1.2V
PLL: Auto
CPU Reference: Auto (.74, .76 and auto all have similar stability, anything else and it bluescreens immediately)
MCH Core: 1.3V
MCH Reference: 0.72V (anything above .76 and I get bluescreens immediately)
MCH/DRAM Ref: Auto
ICH I/O: Auto
ICH Core: Auto

Any advice would be great!