Hi
-----------------------------------
Q6600 VID 1.2500v
450x8 - 3600mhz
4x1Gb DDR2- 1080

CPU Voltage 1,41250v----TOO HIGH try 1.37 or 1.39
CPU GTL Voltage Reference (0/2) 0.630 -- correct? OK
CPU GTL Voltage Reference (1/3) 0.670 -- correct? OK
CPU PLL Voltage 1,52 set 1.54
FSB Termination Voltage 1,28 OK
DRAM Voltage 2.10
NB Voltage 1.18---- set 1.22
NB GTL Reference 0.630 -- correct? OK, but try AUTO
SB Voltage 1.10-----set AUTO
PCIE Voltage 1.50----set AUTO
____________________________________

Load-Line Calibration [Enabled]
CPU Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled]
CPU Clock Skew [Auto]
NB Clock Skew [Auto]
CPU Margin Enhancement [Optimized Mode]
____________________________________

Advance CPU Settings:
CPU Ratio Setting: 8
C1E Support: [Enabled]
Max CPUID Value Limit: [Disabled]
Intel Virtualization Tech: [Enabled]
CPU TM Function: [Disabled]
Execute Disable Bit: [Enabled]