in the past, with Core 2, you could not down grade, so, when you was increasing the FSB, after a while, mem was becoming a problem on non extreme edition parts.
Here , you can increase the Bclock, while lowering the mem ratio, that will help in many case.
Got the point?
If you increase the bclock from 133 to 250, you would have need 2000Mhz DDRIII modules, and i am sure that you guy very quickly will pass 250 Bclock.
at this bclock, 800 ratio will be handy.
of course, all of this is at your own risk ...
Bookmarks