Quote Originally Posted by kayl View Post
didnt run prime1024 sorry, i know with a quad core around the 84% things get real hot.
E8500 with 1.85v warmest i seen load was -104c i think after 4 hrs benching.
idle the second stage is around 200psi, after 4 hrs benching around 220psi.
low side pressure would be around 10hg idle and a few hg load
with 310w load it was a few psi load

firstage was around 4psi low and not too sure high stage pressure, under 200psi i suspect.
Very useful info . Thanks for the details .

The reason i'm asking all these questions is cause i made a new cascade with two rotary compressors ( 30cc each one ) . I don't have very good evap temps (-107c idle , -96c with 230watt cartridge) cause the vacuum is very high (about 15hg under load) . I'm using 1.7m 0.078 ... but i think i have to try something like 1.5m (or 3m 0.091) .

Thank you Kayl again !!