ASUS P5Q-E (P45) pre-view

[Leeghoofd]

STOP USING AUTO PLZ FOR THE FOLLOWING SETTINGS !!! UNLESS YOU HAVE VERIFIED WITH A DIGITAL MULTIMETER THAT YOUR BOARD DOES NOT OVERVOLT LIKE MOST E AND DLX BOARDS....
CPU PLL Voltage: Auto --> Try 1.56
FSB Termination Voltage: Auto --> TRY 1.22

and try to go lower on them... though do NOT use the lowest settings possible

CPU PLL Voltage: 1.5 THESE OVERVOLT AS MUCH AS AUTO
FSB Termination Voltage: 1.1 THESE OVERVOLT AS MUCH AS AUTO