ok ok, after reading a little bit more on this thread I've got a few questions. With the above hardware I plan on doing the following:
Increasing the FSB from 333 to 400 with a multiplier of 8 (stock multiplier setting) should effectively give me 3.2GHz correct?
this would mean running at 4 x 400 = 1600MHz correct? If so would my memory be able to cope with this as the effective speed is 1600MHz but the operating frequency is 800MHz? sorry if this is a dumb question.
Now my question is what voltages would you guys recommend to start with? to see how stable the system would be?
CPU Voltage
CPU GTL Voltage Ref (0/2) and (1/3)
CPU PLL Voltage
FSB Termination Voltage
NB Voltage
NB GTL frequency
SB Voltage
DRAM Voltage I will keep at 1.90v (as specified by OCZ, I might try running it on 1.8v and see if it'll work)
and would I have to change the CPU Ratio setting or FSB Frequency?
Any other changes you could recommend or any settings you'd recommend I keep on auto would greatly appreciated
Reply With Quote
Bookmarks