Live MB OC Report :: ASUS Rampage Extreme

[JargonGR]

I ran into simular issues & found that putting the 4+4 pin connector on the MOBO instead of the 8 pin solved my issues.

This was due to the fact that the 8 pin is on a shared rail, while the 4+4 is solely on rail 2.

Hope that helps.

Yes that did the trick and I have no more issues with power on/off.

I have also managed to get the board stable with my Q9550 @ 4080Ghz 1600 Mhz Ram 1T 7-7-7-18 with 4x1 Cellshocks 1600. I am now testing 490FSB with RAM @ 1668 and same latencies and I think I am close to stability. Will report back.

As soon as i get it stable at 490FSB I am stopping and will try set up the 3x1TB RAID 0 array again.

*EDIT*

LOL I managed to install Windows on 3X1TB Samsung F1s but one of them crapped out. The hell with RAID 0 unless I get a good controller the Intel one is not the way to go.

Do you think I am pushing it with 3 x TB Disks? (Actually 4x1TB I have a hitachi hooked as well).