DFI LANparty DK P45-T2RS/T3RS (Intel P45) - News|Info|Results

[Pcuser]

Anyone can tell me where to find the 10/03 beat bios for the Plus version (i went through a few pages but couldn't find it)

TIA !

[nikk]

Sorry. IBT = intelburn TEST ^^;;

600x6
intelburn 5 passes Can I do that?

haven't tried, not really interested in 100% stability, but i might try it next time

Anyone can tell me where to find the 10/03 beat bios for the Plus version (i went through a few pages but couldn't find it)

TIA !

http://us.dfi.com.tw/Support/Downloa...FLAG=B&SITE=US

[Pcuser]

Thanks !

[tamashumi]

e8400 600x6 done

straight boot from bios

aircooled with noctua nu6 on nb

Really nice, gratz!
I'm interested would it pass some priming or test like: SuperPi 32M while Prime95 running with single thread of large FFTs. If you be so kind and do such a test when boot this settings again

Of course not, just finding max fsb but I stopped because it was too late and I left the searching for tommorow but day after I couldn't reach over 400MHz.
...
That speeds are with different voltages but no success. Divider was 1:1 but I tried other also and as you see, no success. Very weird
As I said, I have a lot of experiences with mobo's but that looks like ready for RMA.

I had the same problem with non-plus before I replaced it.
But someone here helped me. I guess it was N-C, but not sure right now, sry xD
Anyway, there are different 1:1 settings, f.e. 400/800 (this was impossible to see even bios-post for me over FSB 410) or 333/667 this one helped in my case - try it.


Btw. anyone succeed with xxx/1006 setting with 10.03? No bios post no matter what I'm trying.

[Bullet92]

I had the same problem with non-plus before I replaced it.
But someone here helped me. I guess it was N-C, but not sure right now, sry xD
Anyway, there are different 1:1 settings, f.e. 400/800 (this was impossible to see even bios-post for me over FSB 410) or 333/667 this one helped in my case - try it.

I already sent it back and waiting for a new one. Hope that it'll be good as that (600MHz FSB and A3 rev.). Now I'm fighting with Foxconn Mars

[nikk]

Really nice, gratz!
I'm interested would it pass some priming or test like: SuperPi 32M while Prime95 running with single thread of large FFTs. If you be so kind and do such a test when boot this settings again

i can't say no if i 'm asked nicely, i'll try and do that next time

[Gautam]

Where can I find 812 for the plus???

[palee02]

LANPARTY DK P45-T2RS PLUS Bios 812

[nikk]

Sorry. IBT = intelburn TEST ^^;;

600x6
intelburn 5 passes Can I do that?

Really nice, gratz!
I'm interested would it pass some priming or test like: SuperPi 32M while Prime95 running with single thread of large FFTs. If you be so kind and do such a test when boot this settings again

i didn't try IBT, afaik it's not that good at testing nb/ram, but i think this will satisfy you

1 thread prime large fft plus superpi32m:

start


about half way there


finish


it took a bit more vtt

while i was at it, i run 3 loops of crysis cpu benchmark (with hd3850 at 918/1062, forgot to start gpuz)


then i played around a bit and got to this:

625x6 validation

superpi 1m at 625x6


always aircooled

[C-N]

@ nikk, what OS are you using & how come SG is messed up with a rounded top left edge. If you wanted/made it like that I apologise, if you are on vista & its not displaying correctly I'll probably be able to adjust it so it displays correctly this weekend if I get round to installing Vista.

Oh & nice fsb btw

[nikk]

@ nikk, what OS are you using & how come SG is messed up with a rounded top left edge. If you wanted/made it like that I apologise, if you are on vista & its not displaying correctly I'll probably be able to adjust it so it displays correctly this weekend if I get round to installing Vista.

Oh & nice fsb btw

it's windows server 2008 standard x64, so yeah, vista.
dunno about SG being messed or not, it was always like that, i just dl'ed the skin and used it

[HousERaT]

well now that the 10-03 bios is no longer beta, can anyone speak on the benefits for upgrading from the 8-12 bios?

[Gautam]

I'll give you a benefit, your SuperPi times get slower.

[HousERaT]

I'll give you a benefit, your SuperPi times get slower.

Really? Sorry to hear that. I know that's not what you wanted. Since your thread back home is gone can you post the link to that 600FSB setting?

[C-N]

it's windows server 2008 standard x64, so yeah, vista.
dunno about SG being messed or not, it was always like that, i just dl'ed the skin and used it

Works fine on Vista 32 so it must be a 64/server thing.

[MacClipper]

Oops, forgot to share here.

In case any of you fans are still interested, I have some early pics of the newly released DFI UT P45-T2RS retail mobo in my VRZ post, enjoy.
http://forums.vr-zone.com/showpost.p...2&postcount=18

[C-N]

Oops, forgot to share here.

In case any of you fans are still interested, I have some early pics of the newly released DFI UT P45-T2RS retail mobo in my VRZ post, enjoy.
http://forums.vr-zone.com/showpost.p...2&postcount=18

Its ordered already, I just hope it performs.

[PolRoger]

Its ordered already, I just hope it performs.

I'm also very interested in the UT version. Please keep us posted regarding your experience with it once you get it running.

[mercyless]

have this board a few days now, all seem well untill i flashed bios to 10/03, since then, many c1 and resets needed, in the end i get through this.

i've come from ut p35, under dram tab, many options to fine tune memory, on dk p45, under dram tab, only section showing is the memory timings, ie, 5-5-5-15, performane level, act delay, flex mode.
this cant be right ? can anyone confirm if this is correct, am i missing something here or if the flash went wrong ish.

[C-N]

have this board a few days now, all seem well untill i flashed bios to 10/03, since then, many c1 and resets needed, in the end i get through this.

i've come from ut p35, under dram tab, many options to fine tune memory, on dk p45, under dram tab, only section showing is the memory timings, ie, 5-5-5-15, performane level, act delay, flex mode.
this cant be right ? can anyone confirm if this is correct, am i missing something here or if the flash went wrong ish.

In main BIOS options page press F9 to unlock hidden features.

[mercyless]

thanks, it had to be something silly

[C-N]

I'm also very interested in the UT version. Please keep us posted regarding your experience with it once you get it running.

Just got it up & running, booted 1st time 1007 BIOS so its a fresh one. BIOS looks just like the DK BIOS.

Made a thread here http://www.xtremesystems.org/forums/...d.php?t=206048 to chat about it.

CN

Sorry for messing with this thread

[decayed.cell]

Hmm 1003 lets me run SuperPI Mod 1.5 1M without crashing at stock settings now on Vista x64 lol. I think they also fixed a problem with NB set to 1.4v causing PCIe not to work and a problem with disabling the JM controller to boot hard disks

EDIT: Take that back SuperPI is crashing on the second iteration now how random

[Ozzfest05]

I have the T2RS+ coming in and would like to know which is the best know bios version for highest FSB capability

[Aerou]

I have the T2RS+ coming in and would like to know which is the best know bios version for highest FSB capability

depends on the cpu, from my experience, you will *probably* have good results on a wolfdale cpu with bios 812

there's a large difference between highest SPi 1M FSB and highest 24/7 FSB

you'll have better results with trying different GTL ratios or voltage combos, than BIOS (that count for anything 725 and newer)