Quote Originally Posted by RASTAVIPER View Post
Hey guys..
I just started doing my homework last night.
With a few tests I managed to run 3dMARK06 and Aquamark.
At 3248mhz with 14 multi, I currently passed SPI with 23,593sec.
Stock cooling, 1,33vcore and temp around 67 degrees.
My ACC is at 0.

Now my question is hot to get pass a small multi problem.
At 14 multi, I reach 230 at fsb (460 memory) and pass SPI.
At 14,5 multi, I reach 222 and pass SPI.
At 15 multi,I can't pass SPI at 209 fsb..
Tried a little more vcore, nb vid and vdimm but nothing changed.

Any ideas??Should I reaise any other voltage?Or change ACC, which works great at 0?
Hi there. I see you have a 125w 9950, congrats on that. I can already see the difference from the 140w version I have.

Anyhow, I would just raise up one notch on the CPU voltage. Try these settings:


CPU voltage one notch higher
CPU NB voltage - 1.35v

then put your NB and SB voltages on Auto. I run them auto all the time and I have no problems. Try that and let me know how it goes. Remember you don't need to give your RAM voltage as you are using a lower FSB meaning your RAM will be clocked at lower speeds.