i got a little bored and figured i'd make a few small adjustments.
running a pass of memtest86+ atm roughly 50% complete.
495mhz fsb, 1190mhz ram, 5:6 divider 333mhz bclk, 1.55v vNB, pl 7, 1.64v vCPUPLL, 1.42v vTT, 2.24v vDIMM, dram controller ref -30mv, 5-5-5-16-45-5-2N, 0.62x CPUGTLREF, 0.57x NBGTLREF, ai clock twister = stronger, dram static read enabled, cha clk skew = -250ps, chb clk skew = -200ps, pci-e = 102mhz, vSB = 1.10v, vSB_SATA = 1.60v, cpu multi @ 6x till i certify mem subsystem stability then i'll make couple of adjustments and change it to 7x.
i'll update this once I have some results worth adding.
update: failed at 94% in modulo 20, so made a few small changes and rerunning that test. i'm still surprised it made it through 42mins. changes : vTT -> 1.44v, dram controller ref -> -20mv, cpu gtlref -> 0.63x, vNB -> 1.57v
seems those changes did the trick, running block move test again just to make sure the changes don't effect timings
Reply With Quote
Bookmarks