clear bios and then try to start w/ one stick of memory.Originally Posted by Elio
clear bios and then try to start w/ one stick of memory.
i7-920 (3951A424) @4015 w/ HT (191x21) & CM V8
Asrock x58 Extreme (bios p2.30)
3x2gb OCZ Platinum DDR3 @1530Mhz (7 7 7 21 1T)
Asus 5770 @1000c 1400m 1.25v
2 Samsung F3 1TB Drives in RAID0 (128k stripe)
2 Samsung SH-203N 20X DVD-RW Drives
CoolerMaster HAF-922 // Corsair TX650 PS
Hanns-G HG-281D 28" LCD
Well i RMA'ed my board...the bios went AWOL and the mobo was busted.
Edit :
So i got the new mobo back. same REV as the old one.
any way i got with Bios 906
is 1102 worth changing to?
Last edited by Elio; 09-15-2008 at 06:42 AM.
CPU: Intel Q6600 Batch L731B VID 1.2625V @3.2 1.296V 24/7
Tuniq Tower 120 Lapped (replaced fan)
GFX: eVGA 8800GTX
RAM: 2GB G.Skill HK 4-4-3-5(ProMos) & 2GB Crucial Ballistix PC2-5300(D9GMH) @ 5-5-5-15 1066 2.25V
MB: Asus P5K-E/Wifi-AP (Bios 1006)
Are there any differents 1013 and 1102 ? Which one is reach better fsb ?
1102 supports the E0 45nm. I needed it for my E0 E8500. As far as which clocks further - if you have an E0 you need to use this bios so it doesnt really matter. For my 65nm quad, 1102 clocks same as any other.
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
I tried the pencil mod, and I never seemed to get a result from it... I'm positive I penciled in the right one, I did it pretty dark after increasing the darkness a few times.
1. Intel 2500k @ 4.4 / ASUS P8P67 Deluxe / G.Skill 1600 2x4GB / eVGA GTX570 / Hitachi 2x1TB RAID 0
2. Intel Q9400 @ 3.2 / ASUS Maximus II Formula / G.Skill 1066 2x2GB / eVGA GTX460 SE @ 750/1820 / Hitachi 2x160GB RAID 0
3. Intel Q6600 @ 3.0 / ASUS P5K-E / G.Skill 1066 2x2GB / Diamond HD4850 / Hitachi 4x320GB RAID 0
4. Intel E8200 @ 3.2 / ASUS P5Q Deluxe / OCZ 800 Platinum 2x1GB / eVGA GTX260 SC @ 648/2180
5. Intel E8200 @ 3.2 / DFI P35-T2RL / G.Skill 800 HZ 2x1GB / eVGA 8800GT @ 675/1950
6. AMD X4 635 @ 2.9 / MSI 785GT-E63 / G.Skill 800 HZ 2x1GB / ATI HD4200
7. Intel i3 @ 2.13 / Intel PM55 / Samsung 1066 2x2GB / Intel HD Graphics
8. Intel 2.8E @ 2.8 / ASUS P4C800 Deluxe / HardCoreCooling 2x512mb 4000 / ATI X850XT
9. Intel P3 800mhz / Intel i815 / Crucial 1x256mb / ATI 9700 Pro
P5K-E WiFi is my favorite mobo, I'll never forget it
But the socket pins are sd, I don't know what happened
This photo is not very good.. Now it's worse, much worse
Last edited by racergr; 09-23-2008 at 01:45 PM.
No idea how it happened?
| Asus nVidia 580 GTX @ 850MHz |
| Windows 7 x64 Ultimate | Mac OS X 10.6.8 | Mac OS X 10.7.2 |
| Intel Core i7 970 @ 4.2GHz | Gigabyte X58A-UD9 | 12GB Corsair 2000MHz 8-8-8-24 |
| HTC HD2 | MIUI 1.10.21 | Android 2.3.7 | TyTung 12.4 Kernel |
New Builds Coming Soon..
No idea man
New photos
Did you do this?
C2D E8400 (8*500), Corsair H50, Asus P5Q Deluxe, TakeMS 2*2GB@1000MHz, Asus GTX 470 + Sparkle GTX 260 (216), X25-M G2 80GB + 2*WD 640GB (RAID 0) + 2*Samsung 250GB (RAID 0) + Samsung F3 1TB, Samsung SH-S223F, Corsair TX750W, CM 690, Logitech G5 & X-540
No man
Took the CPU out and it was like that? That's proper messed up!
| Asus nVidia 580 GTX @ 850MHz |
| Windows 7 x64 Ultimate | Mac OS X 10.6.8 | Mac OS X 10.7.2 |
| Intel Core i7 970 @ 4.2GHz | Gigabyte X58A-UD9 | 12GB Corsair 2000MHz 8-8-8-24 |
| HTC HD2 | MIUI 1.10.21 | Android 2.3.7 | TyTung 12.4 Kernel |
New Builds Coming Soon..
Holy Snikies!!! Looks like the result of either etreme Heat, or 2 much strain in the center of the CPU socket, maybe from over tighting the cooling device?No idea man
New photos
Sandy Bridge 2500k @ 4.5ghz 1.28v | MSI p67a-gd65 B3 Mobo | Samsung ddr3 8gb |
Swiftech apogee drive II | Coolgate 120| GTX660ti w/heat killer gpu x| Seasonic x650 PSU
QX9650 @ 4ghz | P5K-E/WIFI-AP Mobo | Hyperx ddr2 1066 4gb | EVGA GTX560ti 448 core FTW @ 900mhz | OCZ 700w Modular PSU |
DD MC-TDX CPU block | DD Maze5 GPU block | Black Ice Xtreme II 240 Rad | Laing D5 Pump
No no.. I put the mobo into the box, but I forgot to place the plastic cap (the one which is for security). I am an ahole, I know
I'll be getting this board hopefully this week; on it's way from CanadaNice to see a place to learn the ins and outs of it as I go!
Hello.
Does anyone now what could be the problem. I flashed my P5K-E with the 0602 bios and now the motherboard powers on, and that is all, the fans are spining, but no boot, i cant get into bios, nothing.
What can i do? It worked well until i flashed it with the 0602 bios, i did it becouse i hoped for a better OC, and now nothing.
any idea's?
Thanks.
Which CPU do you use?
C2D E8400 (8*500), Corsair H50, Asus P5Q Deluxe, TakeMS 2*2GB@1000MHz, Asus GTX 470 + Sparkle GTX 260 (216), X25-M G2 80GB + 2*WD 640GB (RAID 0) + 2*Samsung 250GB (RAID 0) + Samsung F3 1TB, Samsung SH-S223F, Corsair TX750W, CM 690, Logitech G5 & X-540
E8500, do you thin that it dosen't support it?
Exactly. You should find older CPU and use it to flash BIOS back to newer version.
C2D E8400 (8*500), Corsair H50, Asus P5Q Deluxe, TakeMS 2*2GB@1000MHz, Asus GTX 470 + Sparkle GTX 260 (216), X25-M G2 80GB + 2*WD 640GB (RAID 0) + 2*Samsung 250GB (RAID 0) + Samsung F3 1TB, Samsung SH-S223F, Corsair TX750W, CM 690, Logitech G5 & X-540
you are right. I inserted in a Pentium 4 CPU and in works now. So i guess back to a newer version of bios. Thanks a lot, mate.
It turns out that with decent ram this P5K-E really shines. Currently Priming @ 485MHz FSB with my Quad and loving it.
Should be able to push for 500MHz+ for at least benching! Only thing over stock is MX2 on the Northbrige instead of the Asus goop.
| Asus nVidia 580 GTX @ 850MHz |
| Windows 7 x64 Ultimate | Mac OS X 10.6.8 | Mac OS X 10.7.2 |
| Intel Core i7 970 @ 4.2GHz | Gigabyte X58A-UD9 | 12GB Corsair 2000MHz 8-8-8-24 |
| HTC HD2 | MIUI 1.10.21 | Android 2.3.7 | TyTung 12.4 Kernel |
New Builds Coming Soon..
Need at least 12xx bios for 45nm and for the absolute latest for the E0 45nm.
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
12xx bios? 1102 is the latest...
Hello many computer guru,
I am purchasing a 1.5TB HDD Seagate, and I am not sure if this mobo supports it. Does anyone know?
Also, this is OT, but I would set this additional drive as a slave? (compared to the 500GB i already have installed).
Thanks.
you're right, its 1102. 1102 is the only one that recognizes E0 wolfdales.
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
Well I got my board and am having trouble getting stable over 3.8. Does anyone have an e8400 that would be willing to share some stable settings they here? I know mileage vaires, but I'm still kinda new to OCing and would like some starting points.
Posting Permissions
Reply With Quote
Bookmarks