ASUS P5Q3 Deluxe discussion

[Fitseries3]

i have had a few sets of HZ's now and only this pair has run this well.

[BNDMOD]

i have had a few sets of HZ's now and only this pair has run this well.

Ah... so... not all or many pair of HZ can run that speed ? only one of few kits that you have tested?

[Fitseries3]

i think most pairs do pretty good but not all. im still trying to get something over 2000mhz to work.

[BNDMOD]

i think most pairs do pretty good but not all. im still trying to get something over 2000mhz to work.

Hahaha Vista can`t boot... winload break with 1900 to 2000 mhz hahaha i need XP....

[Fitseries3]

you may need more NB for it to work. i put a fan over my NB and use 1.46v- 1.54v depending on the cpu's speed. i know for a fact that i cannot get 5ghz cpu/2000mhz mem to boot into vista and get a screenshot. you may try the 9x multi and see if it works though. good luck.

[BNDMOD]

you may need more NB for it to work. i put a fan over my NB and use 1.46v- 1.54v depending on the cpu's speed. i know for a fact that i cannot get 5ghz cpu/2000mhz mem to boot into vista and get a screenshot. you may try the 9x multi and see if it works though. good luck.

I set 500x8 (4000Mhz) and ddr3-2000 9-7-8-21 and 9-9-9-24 with 2.04 vdimm

I use 1.4 for nbv

I have 3x120mm shooting directly to the mother... and corsair air flow over ram...

I`ll try to use more vnb

[BNDMOD]

Ok.. let me show this..

RAM MaxFREQ. 2000 Mhz (450 x 9)



http://valid.x86-secret.com/show_oc.php?id=424625



Only quick test for now.

[Fitseries3]

nice!

i still cant get much over 2000 though.

[BNDMOD]

nice!

i still cant get much over 2000 though.

Hahaha but you reach 2000 mhz stable.. and i don`t... for now :P i hope...

[xTKxhom3r]

hi i just got a p5q3 and i wanted to know which is a good ram to buy? on my p5q dlx iv been using gskill and its worked pretty good so far...

i want to buy 4gb and 1333 speed seems to be the sweetspot in price...

[Lukee]

I was using Kingston HyperX. Pure garbage with this board.

A few people here had very good results with Gskill, so I bought the Gskill 2 X 2GB HZ 7-7-7-18 1.9V kit and it runs smooth.

On my E8600 machine, memory is running at 1680 at it's factory settings.

[xTKxhom3r]

I was using Kingston HyperX. Pure garbage with this board.

A few people here had very good results with Gskill, so I bought the Gskill 2 X 2GB HZ 7-7-7-18 1.9V kit and it runs smooth.

On my E8600 machine, memory is running at 1680 at it's factory settings.

thanks for the reply bro

do you have a link to it? and was it 1333 from factory or 1600?

[racergr]

Hello guys :p

I tried the mobo with my Q6600 and my phase the previous Friday.


WOW!! I love the FSB! 529FSB with my Q6600, while my P5E64WS Evolution stopped at 507FSB



I used CPU-Z 1.45 (), so I can't validate my results.




Max MHZ. My Q6600 has more MHZ, but I had problems with my PSU (CM 400W )


And here is a completely untweaked SPI




The mobo didn't work well with my 1600 ADATA, but it worked very fine with one stick Corsair Dominator 1800C7D (the other is dead ). 1010MHz 7-6-6-15 ~2.2V. I can't find the screenshot at the moment, when I find it I'll post it

[Lukee]

thanks for the reply bro

do you have a link to it? and was it 1333 from factory or 1600?

Here you go.

http://www.newegg.com/Product/Produc...82E16820231167

It's listed at 1600 MHz

They also have the 2 GB kits if you only want 2 x 1 GB.

If price is a consideration and you want the 1333 MHz memory, I don't see why it should be much different. I would get the HZ one though.

[xTKxhom3r]

Here you go.

http://www.newegg.com/Product/Produc...82E16820231167

It's listed at 1600 MHz

They also have the 2 GB kits if you only want 2 x 1 GB.

If price is a consideration and you want the 1333 MHz memory, I don't see why it should be much different. I would get the HZ one though.

thanks for the reply bro but thats to expensive for me...i think im just going to go with the 1333 versions...

[Lukee]

thanks for the reply bro but thats to expensive for me...i think im just going to go with the 1333 versions...

Cool. They should work fine for you.

[Lukee]

Question about 500+ FSB.

Let's say that I want to try 520 FSB and 8 x multiplier, would I have to increase the NB or FSB voltage?

[masterchan777]

Hi Guys , Bios version 1406 will be out very soon , ASUS is updating its support pages , HOWEVER if you don't want to wait until this is done , you can download it from ASUS server

http://dlsvr04.asus.com/pub/ASUS/mb/...ELUXE-1406.zip

Things went more stable for me with it and I think it is going to be a final release not a BETA , cheers ...

[Sav]

thank you

[Crazy Inside]

Hi guys

Look what I can with my memorys... No tweaks



Regards

[BNDMOD]

How good is the 1406? i`m planing to load it tomorrow and try to test it with stock fan :s

[janjan]

Hi guys

Look what I can with my memorys... No tweaks



Regards

can u post your everest results please ?

[Lukee]

Has anyone been able to go past 540 FSB on air or water?

I have been able run 540 x 8.5 ~ 4.61 GHz , but I can't push my FSB any further. I even lowered the multiplier to 6 x and kept my memory at around 1600 MHz, and nothing.

If you have gone past that FSB, what settings did you use?

Thanks.

[Fitseries3]

ive gotten to 580. it wasnt hard but anything over that is a PITA. i got 620 to post somehow but not much else.

my board seems to have different settings depending on what day of the month it is. i may sound crazy but a lot of ppl i have talked to feel the same way. its just an odd board.

[Tatty_One]

ive gotten to 580. it wasnt hard but anything over that is a PITA. i got 620 to post somehow but not much else.

my board seems to have different settings depending on what day of the month it is. i may sound crazy but a lot of ppl i have talked to feel the same way. its just an odd board.

I agree totally, an example is, I set the system up for benching the quad at 4.4gig, Orthos it for 5 hours....no problems, do several very nice 2006 runs....no problems, save the profile, then a week later load the profile for some more benching......overclock failed! Everything is in the memory, I have the HZ's and I can run really tight upto 1600mhz (6-6-6-16) but always have stability issues at 7-7-7-18 (or 20) beyond 1600mhz unless I really loosten, for some reason my board does not like the 7 timings