Quote Originally Posted by Solarfall View Post
played around this evening with my tforce and got the max fsb little bit higher




CPU - E8600 Q820A598
Cooling-NB cooled with watercooling ....cpu cooled with intels stock cooler
MB - Biostar Tforce45 rev 5.1 (no mods)
RAM - cellchock pc2 8000
VGA - 8800 gt
HDD - wd raptor ata 7200
PSU - tagan BZ 1100w

Bios settings

Over-Clocking Navigator - Manual
Intel SpeedStep - Disabled
Ratio CMOS Setting - ×6
CPU Frequency Setting : 600 worked my way upto 635 with setfsb
Over Clock Retry Count : 1
FSB(Bsel) To NorthBridge Latch : 1333
DDR2 Enhance Mode : Disabled
************************************************** ***********
DRAM Timing Configuration
DDR2 RCOMP Configuration : Configuration 2
Static tREAD Value : 13
Configure DRAM Timing by SPD : Enabled but didt change anything
************************************************** ***********
Clock Gen Configuration
PCIE Frequency Setting : 100
CPU Clock Skew Control : 200ps
(G)MCH Clock Skew Control : Auto
CPU Clock Driving Control : Auto
************************************************** ***********
Voltage Configuration
CPU Voltage : +0.125
DDR Voltage : +0.500
Chipset Voltage : +0.600v
FSB Voltage : +0.3500v
CPU Core1 GTL Ref Voltage : 0.63*VTT
CPU Core2 GTL Ref Voltage : 0.67*VTT
MCH GTL Ref Voltage : Auto
CPU PLL Voltage : 1.6v
HEY!...this is excellent!

now, you need to crank the multi up to see where it gets to with your top Mhz for that E8600.