Live MB OC Report :: ASUS Rampage Extreme

[Holmer]

Thanks to everybody for sharing information! Finally I got my own RE installed and now it is my turn to ask for your help.
I can not get two stick of my 2x2GB dominators to boot - it hangs with a black screen and the LCD poster says Det DRAM. Every time I boot with one stick after not being able to boot with two stick the post screen tells me overclock failed pres F1 bla bla indicating some setting is not right when using two sticks). Both sticks work fine if I only use one stick (in slot B2) and the memory I use are on Corsair's compatible list for this motherboard. I always put both sticks in the white slots (A2/B2). I have the stock heatpipe with the TIM replased with MX-2 everywhere and the washer mod. I have not tried to OC yet, only set basic settings manual (disabled all the CPU stuff and all onboard devices except LAN1). This problem is there both with BIOS 0301, 0403, and 0501 (the latter is what I use now).
My memory use Samsung IC, their SPD is 8-8-8-24-2T at 1.8V. Unfortunately I do not have other memory around to test.
I suppose I have overlooked some little setting or trick but I hope I have tested the most common things and therefore "qualify" for asking for help.

I have tried to leave all settings in Extreme Tweaker on Auto except CPU ratio and FSB (to prevent it from setting FSB to 450 automatically) and gradually setting things manual to the point below:
My settings:

Extreme Tweaker Menu

Ai Overclock Tuner: Manual
OC from CPU level up: Auto
OC from Memory level up: Auto
FSB frequency - 333
CPU ratio setting: 9
CPU confituration: All disable except Core multi-processing
-cpu clock skew - Auto
-nb clock skew - Auto
FSB Strap to North Bridge - 333
DRAM FREQUENCY - 1333
DRAM Command Rate - 2T
DRAM Timing Control - Manual
*1st information : 8-8-8-24-Auto-88-Auto-Auto
*2nd informaion : All auto
*3rd information : All auto
DRAM Static Read Control - Disable
DRAM Dynamic Write Control - Disable
-DRAM Skew Control
Ai Clock Twister - Auto
Ai Transaction Booster - Auto
*C/P : B1 B2
*LVL : 08 08

EPU II Phase Control - Auto
-----------------------------------------------------------------
*** Please Key in Numbers or select voltage!***
CPU Voltage - Auto
Load-Line Calibration - Auto
CPU PLL Voltage - Auto
FSB Termination Voltage - Auto
CPU GTLVref (o) - Auto
CPU GTLVref (1) - Auto
CPU GTLVref (2) - Auto
CPU GTLVref (3) - Auto
NB GTLVref - Auto
North Bridge Voltage - 1.43
DRAM Voltage -1.8
NB DDRVref - Auto
DDR3 ChannelA Vref - Auto
DDR3 ChannelB Vref - Auto
South Bridge 1.5 Voltage - Auto
South Bridge 1.05 Voltage - Auto
**********************************************
CPU Spread Spectrum - Diable
PCIE Spread Spectrum - Disable