Quote Originally Posted by Martin.v.r View Post
#3702

cl/volt to mem
I'm not sure I understand what that means. If you are referring to vDIMM, that's on auto and Memtest86+ finds no errors.

Quote Originally Posted by CryptiK View Post
You're definitely in need of higher vNB, as you are running a quad and 2 x 2GB ram. Try raising it to 1.26v and re-test. Try vPLL = 1.52v, vFSB = 1.12v, vcore = 1.20v also, I think 1.13v may be too low for vcore at 3.4GHz. After you get the whole system stable you can start lowering vcore anyway and find out what it needs.
I'm stable now at 3.4 GHz with 1.10 vNB and 1.138... vcore, but I can't find stability at stock freqs, not even with higher voltages or Auto. I tried 1.26 vNB and 1.26 vcore and I climbed down to these levels because the system is stable at 3.4. But I will try again what you suggested.

I have to mention one more thing: at stock freqs and Auto settings in BIOS, the Stress Cache module in the Everest Stability Test fails, but the other tests run OK.