**Official ABIT IP-35 Pro Review/Overclock/Guide Thread**

[Ad1tya]

Posting for a friend..

Hes running BIOS 17 on the IP35 Pro, and hes not able to boot with the E8600. It boots once or twice, erratically.

The error hes getting "8.7." which is CPU Voltage Error.

What should he do?

[Dredd]

Posting for a friend..

Hes running BIOS 17 on the IP35 Pro, and hes not able to boot with the E8600. It boots once or twice, erratically.

The error hes getting "8.7." which is CPU Voltage Error.

What should he do?

Did you try resetting the CMOS with the power disconnected for about 5min?

Then when you startup go to BIOS and set a voltage over what your CPU requires. For example, try setting it to 1.4v in bios and then set your memory voltages etc all to the correct level as required. Then turn off speed step and C1E in the BIOS as well. That will lock the voltage in for the CPU. See if it's stable. I'm not entirely confident in a board regulating the CPU voltage automatically.