Quote Originally Posted by Zeus View Post
Some quirks with tweak it:

Sometimes when i want to set Vcore with the tweak it utility, the lcd poster shows Vcore 1.500V when i'm only using 1.3V.

Sometimes the light on the confirm button dies but comes back to live after a complete power down, that means shutting the psu off.

Anyone have Corsair Dominator 1800 running in this board, i can get a set real cheap but i'm also considering some Micron JNL as i saw some awesome results with that.

Decisions...
i have the exact same issues, the confirm button light, and the vcore. i have found the vcore adjustments not to work really well at all through TweakIt during this weekends session and pretty much stopped using it for that. sometimes i would end up with 1.15v

as the dominators, they run the XMP profile no problems at all, with ver1.3 which is Micron based. newer 1800 dominators are a mixed breed so the ICs are always different for the various revisions. i haven't done any overclocking with the dominators but since they were Micron based, i didn't bother.

i have also posted the full review over at Hardware Canucks.com. i will be posting some of the bench results from the first LN2 session shortly. the dewar was filled again today so hopefully i have time for more work this weekend as well. my E8600 seems to top out at 6.1GHz~6.15GHz for some benches so nothing really exciting but still solid numbers.

@Mike...very nice looking system, the tubing setup looks great