Update: 480x7.5 (3.6Ghz @ 1.31 LLC Enabled) booted fine into windows .. And Prime95 Blend failed in 8 minutes, small FFTs lasted 2hr 56 minutes (failed on core 2, core one was going strong)

Settings below:

Code:
AI Overclock tuner: MANUAL
CPU Ratio Setting: 7.5
FSB Frequency: 480
FSB Strap to North Bridge: 333
PCI-E Frequency: 100
DRAM Frequency: 961
DRAM Timing Control: Auto (5-5-5-15-3-55-6-3)

DRAM Static Read Control: DISABLED
DRAM Read Training: AUTO
MEM. OC Charger: AUTO
AI Clock Twister: AUTO
AI Transaction Booster: AUTO

CPU Voltage: 1.32500 (1.31v CPUz)
CPU GTL Voltage Reference: AUTO
CPU PLL Voltage: 1.54
FSB Termination Voltage: 1.20
DRAM Voltage: 1.92
NB Voltage: 1.20
NB GTL Reference: AUTO
SB Voltage: AUTO
PCIE SATA Voltage: AUTO

Load Line Calibration: ENABLED
CPU Spread Spectrum: DISABLED
PCIE Spread Spectrum: DISABLED
CPU Clock Skew : AUTO
NB Clock Skew : AUTO
CPU Margin Enhancement: OPTIMIZED

C1E Suppport: DISABLED
Max CPUID Value Limit: DISABLED
Intel Virtualization Tech: DISABLED
CPU TM Function: DISABLED
Execute Disable Bit: DISABLED
Also, at my previous setting of 460x7.5, small FFTs were stable.. but blend failed after 8 minutes.. and i left 3dmark on loop, came back and saw VPU Recovery had recovered the GPU which had stop responding.. some D3D Devicelost error =/ (XP32, CAT 8.8)