"ASUS P5Q Deluxe discussion".

[plion]

Hey, guys can someone review my settings again. For some reason I was getting random video driver crash only in vista 64 before I updated bios. Any reason why you guys stopped recommending pcie freq. @ 101, I see posts with pcie@ 100 now?

-24hrs prime stable, 100 passes of linpack stable burn test, 12hrs hci memtest/memtest86+ stable.

-Haven't had the video crash since I updated bios, but I'm not sure if it's still there. The crash would happen with pcie @ 100 or 101 with c1e off or on and with performance level manual or auto..

e8400/2x2gb gskill ddr2-800

AI Overclock tuner: MANUAL
CPU Ratio Setting: AUTO
FSB Frequency: 400
FSB Strap to North Bridge: AUTO
PCI-E Frequency: 101
DRAM Frequency: 801
DRAM Timing Control: Auto (5-5-5-15)

DRAM Static Read Control: AUTO
DRAM Read Training: AUTO
MEM. OC Charger: AUTO
AI Clock Twister: AUTO
AI Transaction Booster: MANUAL PL11 ALL PULL-INS ENABLED

CPU Voltage: 1.25625 (1.24v CPUz)
CPU GTL Voltage Reference: AUTO
CPU PLL Voltage: 1.52
FSB Termination Voltage: 1.26
DRAM Voltage: 1.90
NB Voltage: 1.26
NB GTL Reference: AUTO
SB Voltage: AUTO
PCIE SATA Voltage: AUTO

Load Line Calibration: ENABLED
CPU Spread Spectrum: DISABLED
PCIE Spread Spectrum: DISABLED
CPU Clock Skew : AUTO
NB Clock Skew : AUTO
CPU Margin Enhancement: OPTIMIZED

C1E Suppport: ENABLED
Max CPUID Value Limit: DISABLED
Intel Virtualization Tech: DISABLED
CPU TM Function: ENABLED
Execute Disable Bit: ENABLED
Intel Speedsteb: DISABLED
Intel C-state: ENABLED