Quote Originally Posted by monza1412 View Post
Nice one nickless.

Could you tell us the difference between the premium and the deluxe bios? Are there more options??
The difference what I've seen between P5K Delux 0902 and 0702 P5K Premium are only in:
CPU PLL voltage - up to 2.20v and NB Voltage - up to 1.95v. Also with the same settings CPU 9.5x500, RAM (5-5-5-15-3-45-6-3-3) 1:1 with both bioses PL of RAM is PL8 for 0902 and PL12 for 0702.

@kup, Before the crossflash the max.FSB what I've reached was 545. I'm not sure, but I suspect this low FSB with 0902 was result of enabling of Transaction booster:level 2, now it's set on Auto.

Here is my settings:

JumperFree Configuration Settings

AI Overclocking: Manual
CPU Ratio Setting: 7
FSB Frequency: 580 then 600 with setfsb
PCI-E Frequency: 101
FSB Strap to NB: 333
DRAM Frequency: DDR2-1200
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Pre Time: 5
RAS# ACT Time: 15
TWR: 3
TRFC: 45
TWTR: 6
TRRD: 3
TRTP: 3
DRAM Static Read Control: Auto

Transaction Booster: Auto

CPU Voltage: 1.50
CPU PLL Voltage: 1.60
FSB Termination Voltage: 1.20
Dram Voltage: 2.25
NB Voltage: 1.55
SB Voltage: 1.20
Clock Over-Charging Voltage: Auto
Load-Line Calibration: Enabled
CPU GTL Voltage Reference: 0.63
NB GTL Voltage Reference: 0.61
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Auto
NB Clock Skew: Auto

Regards!