"ASUS P5Q Deluxe discussion".

[davidoff619]

JumperFree Configuration Settings
AI Overclock tuner: MANUAL
CPU Ratio Setting: 10
FSB Strap to North Bridge: AUTO
FSB Frequency: 400
PCI-E Frequency: 101
DRAM Frequency: 1002 tried on 800
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: MANUAL

1st Information :

CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 15 tried on 18
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time: 55 tried on auto
Write Recovery Time: AUTO
Read to Precharge Time: AUTO

DRAM Static Read Control: Disabled
DRAM Read Training: AUTO
MEM. OC Charger: AUTO
AI Clock Twister: AUTO
AI Transaction Booster: AUTO

CPU Voltage: 1.4
CPU GTL Voltage Reference (0/2): AUTO
CPU GTL Voltage Reference (1/3): AUTO
CPU PLL Voltage: 1.56
FSB Termination Voltage: 1.30
DRAM Voltage: 2.0
NB Voltage: 1.30
NB GTL Reference: AUTO
SBridge Voltage: AUTO
PCIE SATA Voltage: AUTO

Load Line Calibration: ENABLED
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew : AUTO
NB Clock Skew : AUTO

Advance CPU Settings
CPU Ratio Setting: 10
CPU VID: Default
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Intel® Virtualization Tech: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
__________________

right theses are my settings will boot and stay stable for about 16 mins tops some time a few seconds i cant understand why. i only have the 4 pin power in not all 8 pins. bios 1103 but going to 1201 when i go home 2moz ram in yello slots.

i also tried 465x8.5 with a lower v core and it stoped stable for 22 mins but nothing wants to work not even 450x9. if anyone has any templates for me to try then pm them me. and ill try in the morning. i need my rig rock solid stble for gaming temps not a problem 9800 gx2 and cpu watercooled.

thanks in advance will let you know how i get on