Ok Kaz ,, first i disconected the BLUE fan wire..This forces 100% fan all the time.. If you look close at the conector youll see that you can lift up the open section of the connector above the pin . use a needle or very small flat tip screwdriverr and lift whil gently pullin the blue wire out.

This is X1550 2pin but the 4pin connectors are unpinned the same....Unpin the (Blue wire only) on each card and your good to go.


The fans arnt that loud if your ocing the cards ""High fan is better than no fan ""unless you have water.





As for AMD GPU clock tool use the most recent version..9.8.

To set the clocks choose the GPU and then type in MHZ then hit ok..To se if it sticks (click Check clocks)..

BIG NOTE:
You will have to turn Overclocking off in CCC.. make shure its locked.No profiles will work with fan stock, thats why i depin the blue fan wire to force 100%fan..

http://www.techpowerup.com/downloads...ol_v0.9.8.html

Also from what i know Rivatuner isnt released for 4850/4870 yet...but on the bright side AMD released the new 4870x2 today..

http://www.newegg.com/Product/Produc...82E16814102768


i wait a week or two for prices to settle then im gonna oc one of those...Currently playing with new 9800GT for my M2n32 deluxe/9600BE ..the 2001 bios is Solid with TLB disable that actualy works