"ASUS P5Q Deluxe discussion".

[Mumid]

if you don't mind can you guide me some config with v.1103 bios

the system look like the same
> E8400 C0 Q817A
> Ballistic 2x1GB PC2-6400 (16FD3)
> P5Q Deluxe v.1103 bios



This config is only one that pass on SuperPI mod with 32M
and event how hard i try it can't go over 10mins on Othos (Blend mode)

> first i try on 5-5-5-15 but not work at all so it work on 5-5-5-18

> play with memory tweak (i can't adjust any value without "Auto")
DRAM Static Read Control: Enable
DRAM Read Training: Enable
MEM. OC Charger: Enable
AI Clock Twister: Moderate
AI Transaction Booster: [8] (all pull is Enable/Disable)

> for lowest FSB = 1.30, NB = 1.34, SB = 1.2, Vdimm = 2.22, Vcore = 1.28125


please help me to config these

ps. i have try on your confiq that give above but i seem not work

Silly question perhaps but have you got both of your dimms in the yellow slots? Also I think you are giving too much volts, vdimm = 2.22 you are giving your rams 2.3volts, dangerous with those fragile micron d9's! Also you shouldnt really need more than 1.26-28 on the NB and 1.22 should be fine for fsb.

Could just be that my mem can clock a bit better than yours. Try manually setting your strap to 333 and if that doesnt work, try running PL9 and see if you get stability that way.