Quote Originally Posted by BeastNotro View Post
By the way here is my Q6600 @ 3.6ghz Air Cooled

AI Overclock tuner: Manual
CPU Ratio Setting: 8.0
FSB Frequency: 450
PCI-E Frequency: 101
FSB Strap to North Bridge: Auto
DRAM Frequency: DDR2-901 MHz

CPU Voltage: 1.425 ( 1.416v idle | 1.43 full )
CPU GTL Voltage Reference (0/2): 0.630
CPU GTL Voltage Reference (1/3): 0.670
CPU PLL Voltage: 1.54
FSB Termination Voltage: 1.28
NB Voltage: 1.24
DRAM Voltage: 2.0
NB GTL Reference: 0.630
SBridge Voltage: 1.10
PCIE SATA Voltage: 1.50
Thanks for your settings BeastNotro. However I don't think I can get my Q6600 as high as yours (maybe because I have a P5Q-E?) Vista crashes at 9x400 or 8x450 with similar settings to yours except much higher volts. I seem to be benchmark stable at either 9x380 or 8x433, but Crysis craps out after ~20 mins of play. I know it's my OC'ing that's affecting the game because if I dial down to 9x333 and right all voltages at 0.02 above min then the game is rock solid stable -- but of course I suffer low FPS. How did you come up with some of your settings like GTL, SBridge, and PCIE voltage? Most ppl recommend auto.