MMM
Results 1 to 25 of 1415

Thread: **Unified** DFI LanParty UT 790FX-M2R-M2RS / Phenom /Data Base Thread**

Threaded View

  1. #11
    D.F.I Pimp Daddy
    Join Date
    Jan 2007
    Location
    Still Lost At The Dead Show Parking Lot
    Posts
    5,182
    Quote Originally Posted by Oese View Post
    guys pls help!

    since today, both my lan-ports on the m2r do not work anymore. i cleared cmos, flashed bios 3 times, went on optimized defaults none work.

    they do not show up in the hardware manager and the lights are not flashing neither on the router nor on the board side.

    i now use a pci lan card which works, so, its not router, cable or anything.. can you imagine a possible cause? i know if too many pcie-lanes are occupied this can happen, but thats not the case. all settings regarding this were left untouched.

    it happened after trying to x-fire a 3870 with my new 4850 (which does not work although some people reported about this possibility on the net) and doing some driver deinstall/reinstall. Then i realized theres no net and since then i tried to get it back to life again.

    you can think of some things left to try? it is definitely no windows/vista thing because the lights on the nic's arent flashing during boot up like they should and the nics dont show up in the post-irq-table as well (i dont know if they were included in that table before.. could anybody perhaps check this
    out?)

    that was what i needed for a completely ruined sunday afternoon
    Olli ....whats the common thread with problems associated with Phenom OC that everyone seems to run into? Phenom High HT OC is the root of all of the problems that I have seen to date and no one will listen when I say that Pushing high HT OC with Phenom on these boards is a big NO.. NO but..... No One listens. Sorry brother I think you boinked your board from pushing to hard

    If you are Lucky........ Clear CMOS with the battery out for about a Hour then with the cmos battery in the Upside down position in the battery socket leave it there for about 10 minutes then put your jumper and battery in normal position with only a PS2 Keyboard plugged into the back Boot up Press F1 continue to desktop (unless you need to set the Date because of unactivated windows copy) procede to desktop. See if that works if No Go Reinstall WINBLOWS VISTA !

    I would suggest that you heed my warning about high HT Associated Overclock with the First Phenoms and Phenom Capable Motherboards.........Remember ... Growing Pains its a NEW PLATFORM!!!!!!
    Last edited by Brother Esau; 08-10-2008 at 10:24 AM.
    SuperMicro X8SAX
    Xeon 5620
    12GB - Crucial ECC DDR3 1333
    Intel 520 180GB Cherryville
    Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •