ASUS Maximus II Formula - new P45 king?

[Baxxxter]

I don't know what the Motherboard & POWER's temp' really means...
Your NB/SB's temp' look nice. But I just have 1° between NB & SB.
->The overheat protection on NB is set to 90°, so it's correct.
However, on a real NB WB (on my MF1), my NB's temp' is about 33° to 37°, even with a 9x450. So I think that just cooling the NB with the cooling system is not so bad.


Despite your given temp', you don't give the essential temp': The core's one...
->It's really important to give it.
For example:

(lol, look at the NB's temp' without WB & with bad contact)

I think I'll test the "ALL MAX" in a week.

I guess that POWER is temperature of the mosfets area...? My core temperatures are almost the same as yours, maybe few degrees les, but my oc is also onl 3.7ghz atm.

[mr-rob]

I guess that POWER is temperature of the mosfets area...? My core temperatures are almost the same as yours, maybe few degrees les, but my oc is also onl 3.7ghz atm.

My fans are only set @ 50%... And the ambiant temp' was +/-27°.


I don't really know for the POWER's temp'. Mosfets seem to be hotter than the temp' you gave.

[Baxxxter]

My fans are only set @ 50%... And the ambiant temp' was +/-27°.


I don't really know for the POWER's temp'. Mosfets seem to be hotter than the temp' you gave.

My fans are always at minimum rpm possible ~600rpm :P i like peace and quiet. You are probably right when you say that mosfets are a lot hotter, who knows where the POWER sensor is located... and your temperatures of the NB seems pretty bad Put some air to it

[mr-rob]

Really nice, is more than 500 Mhz FSB bootable ?

510 max for now... It was at the beginning of my MF2's adventure .
And with Cas4 on my Mushkin . I think it was due to a lake of voltage on Vdram

i have mine a 4GHz (9x 445) and i have my CPU PLL on auto and looked at the voltage and it was 1.77 ... that seemed kinda high so i was trying to lower it and its not stable with anything lower ...
any other way to lower it down some?

Auto on CPU PLL give me the same...
1.62v (limite of green voltage) works normally...

My fans are always at minimum rpm possible ~600rpm :P i like peace and quiet. You are probably right when you say that mosfets are a lot hotter, who knows where the POWER sensor is located... and your temperatures of the NB seems pretty bad Put some air to it

My cooling system was "only" based with ONE X-Changer 360 ... With 6 SilentX iXtrema 120 push-pull. @50%, it's quite quiet.
As I can see, you've got 2 rad360 And my NB & 8800GTS arre WCed too...
(actually, my MF2 is on another case with 1 HWlabs GTS 360+6 Ultra Kaze@5v, with NB & GPU WCed)

My NB's temp' was @ the time when I wasn't WCed yet ... Now it's much better despite it's sumer time (ambiant temp' @ 32° )