Quote Originally Posted by Baxxxter View Post
Glad to help, if i only can...
mr-rob, can you do me a favour, and realy try to stable out max on Q6600. Then if you could post the voltages and settings, maybe some findings, what this motherboard likes or dislikes, what shoud i be careful about... Sry but i am not the expert in overclocking, so i would apreciate it if you could help a bit...
Another thing, what would be the bad temperatures for this motherboard? Despite waterblock on mine, it idles POWER 35°, NB 39°, SB 42°, Motherboard 33°. Load takes it average 2-3° higher, exept for POWER somewhere about 45°. In my oppinion this are still high temperatures... Oh and system is overclocked 9x412, all voltages are AUTO except Vcore and RAM. Can you guys post some temperatures of your motherboards...? Tnx in advance!
My Q6600 is actually in "lapping", I reach for now P2000, my goal is a P12000 .
I will do it with pleasure, but not now because I work on my 2nd mod (with MF1) and in the same time, I don't really finished my other mod (the one with MF2).
My Q6600 is full stable @ 9x460 on MF1. Boot+Screen @ 9x470.
I run with it between 9x400/9x450.

->On MF2, this Q6600 seems to run better (specially with lower voltage for the same parameters).
->It also capable of running @ FSB510 (max 470 on MF1).
->It doesn't boot with STRAP 400.

My guess (hope...) is that the Q6600 will run higher with MF2.


I don't know what the Motherboard & POWER's temp' really means...
Your NB/SB's temp' look nice. But I just have 1° between NB & SB.
->The overheat protection on NB is set to 90°, so it's correct.
However, on a real NB WB (on my MF1), my NB's temp' is about 33° to 37°, even with a 9x450. So I think that just cooling the NB with the cooling system is not so bad.


Despite your given temp', you don't give the essential temp': The core's one...
->It's really important to give it.
For example:

(lol, look at the NB's temp' without WB & with bad contact)

I think I'll test the "ALL MAX" in a week.