Quote Originally Posted by opti View Post
Cheers guys I will set them accordingly and see how we go.

Edit : NFG guys. Still refuses to cold boot. I even raised the vNB up to 1.5v . I might slacken the timings maybe. Currently at 5-5-5-15. I'd rather speed over tight timings anyway. But when I tested my ram first they were good for a measly 430mhz before I had to loosen them up.


Edit 2 : I'm using the yellow ddr2 slots. I have been advise not to use the black for reasons unknown to me.

Use the white ones

DRAM Static Read Control: Disabled
Ai Clock Twister : Moderate ou Light
Transaction Booster : Disabled
LEVEL: 1 ou 2

Always set all to voltages to a value different then auto or the minimum one cause all of the raises when u raise fsb it its on auto or minimum value...


Like this:
put it vnb on 1.4V
vpll in 1.60v
vfsb 1.3V
CPU GTL in 63x
NB GTL 63x
and enable the load line calibration