Hey everyone. I am having trouble running my 2x2gb OCZ Platinum XTC memory (OCZ2P10004GK) past its rated DDR2-1000 speed. My setup is a Q6600 (G0 stepping) using beta bios 1101 on the P5Q-E motherboard, and can run 24hr prime95 stable at 9x380. On a 4:5 divider, I am memtest stable running at DDR2-950. But on a 3:4 divider, I get constant errors on Test 5 running at DDR2-1013. Here are some of my bios settings:

FSB Strap to North Bridge: Auto
PCI-E Frequency: 100
DRAM Timing: 5-5-5-18, row refresh cycle time 55

DRAM Static Read Control: Disabled
DRAM Read Training: Auto
MEM. OC Charger: Auto
AI Clock Twister: Auto
AI Transaction Booster: Manual
Common Performance Level: 10
All Pull-Ins: Disabled

CPU Voltage: 1.38750 V
All CPU GTL Voltage Reference: Auto
CPU PLL Voltage: 1.60
FSB Termination Voltage: 1.20 (default)
DRAM Voltage: 2.10
NB Voltage: 1.10 (default)
NB GTL Reference: Auto
SBridge Voltage: Auto
PCIE SATA Voltage: Auto

Load Lice Calibration: Enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew: Normal
NB Clock Skew: Normal

Advanced CPU Settings: All Disabled except SpeedStep