I was just wondering if anyone here has noticed that with BIOS 1102 you can now run PL7 with both pull-ins 1 & 3 enabled? I first tried PL7 Pull-in 3 enabled and it survived 1 hour large FFT's. I then tried PL7 2&3 enabled but my computer locked up after 10 minutes of prime. Next was PL7 1 & 3 enabled and I am now sitting at 1 hour prime and still going.
This was all done with the following settings:
400 Strap | 1066MHz
5-5-4-15-3-35
DRAM Static Rd: enabled
DRAM Rd Trainging: Disabled
Mem OC Charger: Disabled
Ai Clock Twister: Strong
Performance Level: 7
6 | 7 | 6 6 | 7 | 6
CPU Voltage: 1.26V
CPU GTL (0/2): Auto
CPU GTL (1/3): Auto
CPU PLL: 1.52V
FSB Term: 1.18V
DRAM Voltage: 2.14V
NB Voltage: 1.22V
Loadline: Enabled
CPU PCIE Speed Spectrum: Disabled
CPU/NB Skew: Normal
Newest feature (added in 1102): Performance
After this passes two hours I'm going to bump up the NB voltage to 1.32V and try to get Pullin 2 to work.
----------
Edit: I just wanted to add that so far I haven't seen any benefits from enabling PL7 in Everest bandwidth tests.
Reply With Quote
Bookmarks