Quote Originally Posted by stunned_guy View Post
Is that the 6400+ from Dukee ? This should be very good under Dice or LN2

@ Knut
0620 isnt so ggod I think. should do 3.5 to 3.6 ghz I think.
We'll see how that 0620 does in a little while I'll try it on a TT BT when my Venus arrives.

Btw, 230x14=3220MHz/1.31v is my new 156 24/7 setting

This thing totally smokes everything else I have, the only downside is that the temp sensor is a bit crazy. No idea what to think about the temps. idle in BIOS is 39c at this setting. Core temp reports 22-23c, and 35-36c load. ITE reports 33-34c idle, and 43-44c load.

If the BIOS reading is correct, then this chip should be in the low 50's load. On chips I KNOW have decent temp sensors, the core temp is never lower than ITE temp - so by looking at it that way, the BIOS reding looks most right. The 9700nt I'm using had contact with about a third of the IHS (in the middle, but NOTHING near the edges). After a wuick lapjob it's slightly better, but since all I had was a sheet of 180 grit paper as well as a 400 grit sheet, the results weren't the best. I guess it's having contact with half the IHS now, but it's more scratchy than before.

Any comments about this temp "problem"?