First off . . .
Sorry for the double post.
Alright . . .
I've tried to set up a configuration I thought would work and I get an error in MemTest86+ v2.04
Here's the settings I'm using:
Code:AI Overclock Tuner....................................... Manual CPU Ratio Setting......................................... 7.5 FSB Strap to North Bridge.............................. 333MHz FSB Frequency............................................ 500MHz PCI-E Frequency.......................................... 100MHz DRAM Frequency.......................................... DDR2 - 1002MHz DRAM Command Rate.................................... AUTO DRAM CMD Skew on Channel A........................ AUTO DRAM CMD Skew on Channel B........................ AUTO DRAM CLK Skew on Channel A......................... AUTO DRAM CLK Skew on Channel B......................... AUTO DRAM Timing Control..................................... AUTO DRAM Static Read Control.............................. AUTO AI Clock Twister.......................................... LIGHT AI Transaction Twister................................. AUTO CPU Voltage............................................... 1.35000V CPU PLL Voltage.......................................... 1.52V Northbridge Voltage..................................... 1.63V DRAM Voltage............................................. 2.00V FSB Termination Voltage............................... 1.40V South Bridge Voltage.................................... 1.050V SB 1.50V Voltage......................................... 1.50V Loadline Calibration...................................... Disabled CPU GTL Voltage REF................................... AUTO NB GTL Voltage REF..................................... AUTO DRAM Controller Voltage REF......................... AUTO DRAM Channel A Voltage REF........................ AUTO DRAM Channel B Voltage REF........................ AUTO CPU Spread Spectrum................................. Disabled PCI-E Spread Spectrum............................... Disabled
The result I get in MemTest86+ can be seen below.
I know there must be some settings that I can change to help fix this. I'm just unable to narrow down specifically what they are.
I'd really appreciate any help.
TIA.
Reply With Quote
Bookmarks